Volkswagen Golf Plus, Jetta Double Din Car Stereo CD Fitting Kit
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 10
- Brand: Dynamic Sounds
- Model: FKIT-VW-05
- EAN: 3779030720215
- Warranty: 2 Year Warranty
Description
Product Compatibility Chart
Make | Model | Years | Notes |
Volkswagen | Caddy | 2004 onward | |
Volkswagen | EOS | 2006 onward | |
Volkswagen | Golf | 2003 onward | 5 |
Volkswagen | Golf | 2005 onward | Plus |
Volkswagen | Jetta | 2006 onward | |
Volkswagen | Passat | 2005 onward | |
Volkswagen | Touran | 2003 onward |
Package Includes
- Double Din Fascia Panel
- Wiring Harness + Aerial Adaptor Lead
FASCIA ADAPTOR
This adaptor will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.
WIRING HARNESS
The wiring harness will allow to install the stereo.
Note: You will need to connect the red wire to the ignition supply in the fuse box.
Please Note
- Red wire has to be connected to a separate ignition feed in the vehicle to make aftermarket head unit to power up
- Orange cable requires connection to illumination wire but only if the radio requires this for dimming purposes at night.
- Blue wire needs to be connected to the Remote Antenna or ignition supply wire (if rem ant wire not available) on back of car stereo.
Please Note
- When connected your new stereo may not power up, and this is no fault of the wiring harness purchased.
- Audi / VW / Skoda / Fiat and other vehicles tend not to have an ignition switched live feed.
- In these cases it is necessary to manually connect a spurred live feed from fuse box for example to feed switched power so the new stereo turns on and off with the key.
- The wire in particular on the new wiring harness will be the red wire.
AERIAL ADAPTOR
An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.
Note: Blue wire needs to be connected to the Remote Antenna or ignition supply wire (if rem ant wire not available) on back of car stereo.Please email us if you require any other accessories i.e. Fascia Kit, Steering Control Adaptor, Speaker Adaptor, to install the radio in your vehicle as we have everything in stock.
Important Fascia Notes
- China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
- We do not take any responsibility for China units not fitting as they are not industry standard size.
- If the cage supplied with the stereo does not fit the fascia then you must purchase a universal cage which is slightly smaller.
- Click here for CT23UN01 UNIVERSAL Mounting Cage
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.