Radio Replacement Kit, allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. This kit includes Fascia and Aerial Adaptor.

Package Includes:

• Double Din Fascia (Matt Black)
• Fakra to DIN Aerial Antenna Adaptor
• ISO to Din Antenna Aerial Adaptor

Porsche 911 (996) and Boxster (986) 1997 - 2004 with speaker wires
present on the rear as in the photo below. 
Speaker wires are part of the Brown plug in the middle.
No wiring harness adapter is required.
Some Porsche do not come wired with an ignition on off sense wire at the stereo.
This may need to be wired in on installation with a spurred feed.

Fascia Adaptor

Replacement car audio fascia to enable you to change the original radio in the car to a Single / Double DIN aftermarket version. This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.

Some trim modification is required when fitting the aftermarket head unit, please see fitting instructions

HVAC Heater Control Relocation

This fascia kit contains a Relocation trim and pocket for the heater controls, some cars with original single din units have the heater controls located higher on the dashboard with the radio, this extra trim allows the heater controls to be relocated lower on the dashboard where the cd storage slots and pocket usually are.

this is only suitable in models WITHOUT THE TOP CUP HOLDER

Please see installation pictures below

Aerial Adaptor

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. 

Important Fascia Notes

• The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.