Universal Sound Processor.
The DEQ-S1000A is Pioneer's Universal Sound Processor, designed for upgrading the sound quality of your factory vehicle stereo and speakers. Since the originally fitted stereo does not need to be replaced, installation* is simple. Due to it's compact size, it can be installed out of sight, adding to a cleaner installation.
The DEQ-S1000A incorporates Pioneer's full custom high performance 48-bit dual-core DSP for high quality premium sound reproduction. An internal clock and pattern are optimally tuned. Sound degradation from jitter noise is thoroughly eliminated.
When used along with Pioneer's Sound Tune app, you can bring high end audio to the basic factory speakers. All operations are performed easily through a compatible smartphone and a wide range of settings are accessible from live simulation settings to 31-band custom equaliser settings via the Sound Tune app.
(*Optional vehicle specific cables may be required, sold separately).
|Pioneer Sound Tune App Pioneer's Sound Tune app, brings high end audio to the basic factory speakers. All operations are performed easily through a compatible smartphone and a wide range of settings are accessible from live simulation settings to 31-band custom equaliser settings via the Sound Tune app.|
|Compatible with Android Connect and listen to music stored on your device without the need for an app|
|13-band Graphical EQ Adjust your audio output in detail for a music experience tailored to your preferences.|
|Made for iPhone With iPhone Direct Control, you can manage your i-device directly from your car dashboard and enjoy superior sound.|
|USB Input Connect any device with an USB interface cable to charge your device or listen to clean, clear sound.|
- Pioneer Sound Tune App
- USB Input 1
- Accessories 1 Remote Control
- Maximum power 4 x 50 W
- 2 x 50 W (4Ω) for subwoofer
- 1 x 70 W (2Ω) for subwoofer
- 2 x 200 W (4Ω bridge)
- Frequency response 10Hz to 20kHz
- S/N ratio 105dB
- Max. current consumption 10A
- Chassis size (W x H x D) 170 x 40 x 95
- Unit weight 0,59
- Compact size
- Made for iPhone
- Compatible Generations
- iPhone X / iPhone 8 / iPhone 8 Plus
- iPhone 7 / iPhone 7 Plus / iPhone SE
- iPhone 6s / iPhone 6s Plus / iPhone 6 / iPhone 6 Plus
- iPhone 5s / iPhone 5c / iPhone 5
- Supported Functions
- Battery charging
- Music playback
- Compatible with Android
- Quick Charge for Android
- 13-band Graphical EQ
- MOSFET 50 W x 4 Amplifier
- Network Mode 3-Way Network Mode
- Listening Position Selector
- Manual TA (Time Alignment)
- High Pass Filter
- Low Pass Filter
- Subwoofer Control
- RCA Pre-Outs 3. (Front, rear and subwoofer)
- High Voltage Output (4Volt)
- Advanced Audio Features
- Exclusive Designed Audio Parts.
- Source Calibration, (Factory Time Alignment and EQ Cancel).
- 31-Band Graphic EQ When Used With Pioneer Sound Tune App.
- Live Simulation When Used With Pioneer Sound Tune App.
- RCA Terminals
- Speaker line input sensor
- Hand Held Remote Control Included
We always recommends that you have your installation carried out by a qualified installer. Our experienced technical staff can take care of all kind of car audio upgrade jobs.
- Car Stereo
- Multimedia Audio Visual (Sat/Navs, Headrest Screens, Roof Screens etc.)
- Speakers/ Subwoofers / Amplifiers
- OEM Adapters Installation (DAB, iPod, iPhone, USB, Bluetooth, Aux)
- Bluetooth Car Kit Installation
- Car Security Alarms
- Vehicle Tracking Systems
- Reversing Camera / Parking Sensors
- Dash Cameras
All installations are carried out at our London Installation center, Vehicle must be brought for installation.