C1-100CT Component Tweeters Pair

1.0-inch (25 mm) Aluminum Dome Tweeters

C1 component tweeters are engineered to deliver refined performance, with excellent off-axis response and high-frequency extension. Utilizing true, edge driven 1.0-inch aluminum domes with silk suspensions, the C1-100ct component tweeters provide smooth, detailed reproduction of treble frequencies from 3.6 – 22 kHz.

The tweeters can be flush-mounted or surface-mounted with the supplied fixtures to fit a wide variety of installation needs. Inline, outboard, 12 dB / octave, high-pass filters are included to ensure smooth response and reliability. These filters also are equipped with Advanced Tweeter Protection Circuitry to improve power handling and reliability.

When it comes to value, C1 is the real deal!

General Specifications

• Continuous Power Handling (RMS) 60 W
• Recommended Amplifier Power (RMS) 20 - 60 W / Ch.
• System Efficiency 91.5 dB @ 1 W / 1 m
• System Nominal Impedance  4 Ω
• System Frequency Response 3.6 kHz - 22 KHz ± 3 dB
• With supplied crossover

Tweeter Physical Specifications

• Flush Mount Fixture Diameter (A1) 1.97 in / 50 mm
• Surface Mount Fixture Diameter (A2) 2.01 in / 51 mm
• Flush Mount Mounting Hole Diameter (B) 1.75 in / 45 mm
• Flush Mount Mounting Depth (C) 0.40 in / 10 mm
• Flush Mount Tweeter Frontal Protrusion (D1) 0.32 in / 8 mm
• Surface Mount Tweeter Frontal Protrusion (D2) 0.87 in / 22 mm

Note:Illustration may not be to Scale

Crossover Physical Specifications

• Width (W) 1.96 in / 50 mm
• Depth (D) 1.34 in / 34 mm
• Height (H) 0.90 in / 23 mm

Surface-mount and flush-mount fixtures and grilles are included.

What's in the box:

• 2 Tweeters (with 6" wires attached)
• 2 Crossovers
• 2 Flush mount housings (tweeters installed)
• 2 Surface mount housings
• 2 Metal spring clips (for flush mounting)
• Four 5/8" Flat head screws
• Two 25mm Stud bolts
• Two 10mm Stud bolts
• 2 M5 Nuts
• Owner's manual

Note: This item/pack is sold as a pair and contains 2 speakers.