Nissan Juke Acenta Premium and N-Connecta 2014-2019 Double DIN Fitting Kit with Steering Wheel Control and Camera Retention

This complete Double DIN fitting kit is designed to allow the installation of an aftermarket Double DIN car stereo into selected Nissan Juke Acenta Premium and N-Connecta 2014-2019 models. The included fascia panel is specifically listed for Nissan Juke 2014-2019, finished in gloss black, and uses side fixing brackets for a flush, vehicle-specific fit with a fascia opening size of 172mm x 98mm.

The included steering wheel control interface adapts the original 20 pin Nissan connector to standard aftermarket ISO connectors, removing the need for a separate ISO radio replacement cable. InCarTec states that it retains the original volume, track skip, source, phone and preset skip buttons on 8-function steering wheels, while the included universal patch lead allows connection to a wide range of aftermarket stereos from brands including Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and other compatible head units.

This kit also includes a USB retention adapter to maintain the original USB connection and a 24-pin reverse camera retention interface to keep the standard factory reverse camera working with an aftermarket stereo. The camera retention interface converts the factory camera signal for head units with an RCA camera input, while the antenna adapter converts the Nissan grey rectangular antenna connection to a standard male DIN connection for the new radio. The blue wire on the antenna adapter must be connected to the new stereo’s antenna turn-on output to power the original antenna amplifier correctly.

Package Includes

• Double Din Fascia With Bracket (Gloss Black)
• (20 pin) Steering Control Interface
• OEM to USB-A Retention Adapter Cable
• Rectangle to Din Car Aerial Antenna Adaptor Cable
• Camera Retention Interface
• Universal Patch Lead

This fitting kit is only compatible with Nissan Juke Acenta Premium and N-Connecta 2014-2019 models with standard reverse camera. Not compatible with 360 birds eye view camera systems.

If you have a factory BOSE audio system you will require an additional interface, part number 20-273

Fascia Adaptor

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia includes side fixing brackets so no fitting cage is required 

Fits Nissan Juke (2014 - 2019) car models, these facelift models have wider original radios compared to the pre facelift cars.

COLOUR: GLOSS BLACK

PLEASE NOTE: For Single DIN installation you will require an additional pocket

Steering Control Interface

Steering wheel control interface and adapter cable for Nissan Juke cars to fit an aftermarket radio upgrade. The cable adapts from the 20 pin Nissan connector (the connector has a larger size terminal at either end of the connector) in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.

This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source, phone and preset skip buttons. (8 function steering wheels)

Installation notes

• Connect male ISO(S) of the steering wheel control interface to the female ISO(S) of the aftermarket radio lead/head unit
• Loose black wire - Connect the radio ground earth ring to the vehicles chassis ground
• Loose pink wire - Connect the pink wire to the speed pulse connector on the aftermarket radio (Not all radios have this, please check manufacturers instructions)
• Loose blue wire (Amplifier turn-on) - This is only required on amplified systems such as BOSE. If your system is amplified this loose blue wire will need to be connected to the amplifier turn on cable on our amplifier integration interface, part number 20-273 (SOLD SEPERATELY)
• Loose blue wire (Antenna turn-on) - This needs to be connected to the antenna turn on cable on the antenna adapter cable.

Camera Retention Interface

This Nissan reverse camera retention interface is designed to allow you to retain the factory OEM fitted reverse view camera when replacing the original stereo with a new aftermarket head unit. It is ideal for Nissan owners who want to upgrade their in-car entertainment system while keeping the convenience and safety of the original reversing camera.

This adapter is compatible with select Nissan vehicles fitted with an original factory navigation head unit and a 24-pin camera connection. It converts the factory camera signal into a format suitable for most aftermarket stereos with an RCA camera input, allowing the original reverse camera to continue functioning without the need to replace it.

The interface provides a vehicle-specific plug-and-play solution, connecting between the factory wiring and the new head unit. This makes installation easier and helps preserve OEM functionality, making it a practical choice for both professional installers and DIY car audio upgrades.

Installation notes

• Connect the Yellow RCA connector of the camera interface to the camera input connection on the back of the aftermarket head unit.
• Connect the vehicle specific connector (24 Pin) to the cars original wiring harness. 
• Connect the loop on the Black wire of the camera interface to a chassis ground on the vehicle.
• Connect the Purple wire on the camera interface to the new aftermarket head units reverse signal wire. (Please refer to manufacturers instructions)

OEM to USB-A Retention Adapter Cable

This USB retention cable allows the installation of an aftermarket head unit while maintaining the factory USB connection. Compatible with Dacia, Ford, Nissan, Opel, and Renault vehicles (see full compatibility list below), it supports charging and basic media playback. USB-supported Android Auto or Apple CarPlay may be limited or unavailable.

Easy installation preserves factory wiring, providing a seamless and professional upgrade for your vehicle’s infotainment system.

(Grey Rectangle to DIN Connector) Antenna Adapter (With Male Bullet Connection)

Nissan (grey rectangle female antenna to male DIN connection) car aerial antenna adapter cable. This cable adapts from the grey plastic rectangle Nissan antenna connector in the car to a standard aftermarket male DIN connector, used when fitting a new aftermarket stereo.

The loose blue wire (male bullet) on the adapter needs to be connected to the antenna turn on output from the new radio, this turns on the original antenna amplifier in the car.

Universal Patch Lead

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces.

Use for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

Important Fascia: 

• The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare cases "modification"  may be  necessary or needed.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the shape & connection in the picture listed is the same as you have in your vehicle. If in doubt please Contact US with your vehicle details and we will confirm what you require.