Complete fitting kit to change the original radio in a 2013 to 2017 Ford Transit Custom van without a display above the radio for a double din after market unit.

Package Includes

• Fascia With Brackets Gloss Grey (Nebula Gloss)
• Steering Control Interface Adaptor
• Male Fakra to Male DIN Antenna Adaptor
• Universal patch lead (Included)

An additional OEM lock and hazard switch assembly (FORD-F1519127) may be required if the original can not be retained.

An additional OEM Card Holder (FORD-F1832265) may be required if the original can not be retained.

This kit is only for vehicles WITHOUT an original display screen above the radio.

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

Fascia kit to install a double din after market radio. This kit comes with side fix mounting brackets, no fitting cage is needed. GLOSS GREY colour, also called Nebula Gloss. Usually on Limited and Sport models. NOTE: The fitting of this fascia requires plastics to be cut behind the dashboard, we recommend this is done be an experienced car audio technician.Extra install time needs to be allowed for to perform the modification.

Steering Control Adaptor

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. 

Steering wheel control interface and adapter cable for Ford Transit, Transit Custom and Transit Connect vans without a separate  display above the radio.

The interface and radio adapter cable, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip and source buttons from the steering wheel with the new radio.

FOR TRANSIT RADIOS WITHOUT THE DISPLAY ON TOP OF THE DASH

Aerial Adaptor

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. 

Male Fakra to Male DIN car aerial antenna adapter cable. This cable adapts from a Fakra connector in the car to a standard aftermarket DIN antenna connector, this is used when fitting an aftermarket stereo upgrade.

Universal Patch Lead

Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces. For use with Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units.

FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Important Fascia Notes

• The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.