Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Citroen Berlingo and Peugeot Partner (2008-2018) car and van models.

The interface in this kit has an additional BUZZER to retain the original front and rear parking sensor tones that are usually lost when replacing the original radio.

Package Includes

• Double Din Fascia Adaptor Trim (Matt Black)
• 103mm high Double Din Cage Kit
• Steering Wheel Control Interface
• Fakra to Din Antenna Adaptor
• Universal patch lead (Included)

Fascia Adaptor

Radio fascia adapter panel to allow the fitting of an aftermarket Double DIN Car stereo upgrade.This fascia is a trim piece that covers the radio cage to give a professional finish when installing an aftermarket double DIN radio.

103mm high Double Din Cage Kit

Car audio metal cage kit 103mm high. This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation system. It is used along with fascias that have 103mm high hole sizes.Complete with fixings to attach to the new car radio body

Steering Control Adaptor

CANbus steering wheel control and parking sensor retention interface for Citroen and Peugeot cars with quadlock connectors behind the radio.

This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse and reverse gear signals to the new stereo.

It has an additional BUZZER to retain the original front and rear parking sensor tones that are lost when replacing the original radio.This interface will also allow you to access the Settings menu on the cars screen menu to change time and date.

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony, Zenec or resistive programming Head-units.

Fakra to Din Antenna Adaptor

Male Fakra to Male DIN antenna adapter cable.This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade.This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier

Only suitable for vehicles with steering wheel controls and factory parking sensors

Important Fascia: 

• The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare cases "modification"  may be  necessary or needed.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the shape & connection in the picture listed is the same as you have in your vehicle. If in doubt please Contact US with your vehicle details and we will confirm what you require.