InCarTec FK-238 Mercedes C-Class (2004-2007) Single / Double Din Car Stereo Fitting Kit (AUDIO 20/NTG2 SYSTEMS)
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 2
- Brand: InCarTec
- Model: FK-238
- EAN: 7426871625907
- Warranty: 2 Years Warranty
Available Options
Description
Complete stereo upgrade fitting kit to install a Single/ Double DIN aftermarket car stereo and retain the use of the steering wheel controls in Mercedes C-Class (2004-2007) car models with OEM factory fitted Audio 20/NTG2 systems.
Package Includes
- Single/Double DIN Fascia (MATT BLACK)
- Steering Control Interface
- Antenna Adaptor Cable
- Universal patch lead (Included)
Product Compatibility Chart
| Make | Model | Years | Notes |
| Mercedes-Benz | C Class | 2004 - 2007 | (2nd Gen) W203 Facelift |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Only suitable for vehicles with OEM factory fitted Audio 20/NTG2 systems
Fascia Adaptor
This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.
Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version. Fits Mercedes C-Class W203 (2004-2007) car models
A removable pocket is included for Single DIN installation.
Steering Control Adaptor
A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.
CANbus steering wheel control interface for Mercedes C (W200, CLK (W209), GL and M-class, Vito and Viano vehicles with original Mercedes NTG1 head units.
This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, reverse gear, handbrake and illumination signals to the new stereo.
This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units
Aerial Adaptor
An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.
Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.
Important Fascia:
- The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units.
- China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
- We do not take any responsibility for China units not fitting as they are not industry standard size.
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare cases "modification" may be necessary or needed.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the shape & connection in the picture listed is the same as you have in your vehicle. If in doubt please Contact US with your vehicle details and we will confirm what you require.
