Complete fitting kit to install a single DIN head unit and retain the original steering wheel controls in BMW 1,3 and Z4 Series cars.

This is an alternative kit to FK-118.

Package Includes

• Single Din Fascia (Matt Black)
• Steering wheel control interface
• Fakra to DIN Antenna Adaptor
• Universal patch lead (Included)

This kit is for cars WITHOUT original parking sensors, for cars with please use FK-118-PDC or FK-118-PDC.V2

Some cars with start/stop technology may require an additional voltage stabiliser to prevent the radio turning off when the engine restarts

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

Steering Control Adaptor

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. 

Steering wheel control interface and adapter cable for various BMW and Mini cars to fit an aftermarket radio upgrade.

The cable adapts from the Quadlock connector in the car to standard ISO aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.

The CANbus steering wheel control interface is built in to the adapter cable.

This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source and phone buttons.

The CANbus interface will also provide CANbus key present ignition, illumination, speed pulse, reverse gear and handbrake outputs.

A key present ignition means the stereo will turn on with the first click of the key and stay on until the key is removed from the ignition barrel.

Aerial Adaptor

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.  

Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.

Universal Patch Lead

Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls. Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.