InCarTec FK-118 BMW 1 Series 3 Series Z4 Single Din Car Stereo Fascia Fitting Kit
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: FK-118
- EAN: 7426871626065
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
Make | Model | Years | Notes |
BMW | 1 Series | 2004 - 2010 | (E81/E82/E87/E88) |
BMW | 3 Series | 2006 - 2011 | (E90/E91/E92/E93) |
BMW | Z4 | 2009 - 2016 | (E89) |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Complete fitting kit to install a single DIN head unit and retain the original steering wheel controls in BMW 1,3 and Z4 Series cars.
Package Includes
- Single Din Fascia (Matt Black)
- Steering wheel control interface
- Fakra to DIN Antenna Adaptor
- Universal patch lead (Included)
FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD
This kit is for cars WITHOUT original parking sensors.
Some cars with start/stop technology may require an additional voltage stabiliser to prevent the radio turning off when the engine restarts
Fascia Adaptor
This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.
Steering Control Adaptor
A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.
Aerial Adaptor
An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.