InCarTec FK-214-SWC Ford Single Din Car Stereo Fascia Fitting Kit
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 2
- Brand: InCarTec
- Model: FK-214-SWC
- EAN: 7426871616011
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
| Make | Model | Years | Notes |
| Ford | C-Max | 2003 - 2010 | 1st Gen (C214) |
| Ford | Fiesta | 2002 - 2008 | Mk6 |
| Ford | Focus | 2005 - 2011 | Mk2 (C307) |
| Ford | Fusion | 2002 - 2012 | |
| Ford | Galaxy | 2006 - 2014 | Mk3 (CD340) |
| Ford | Kuga | 2008 - 2012 | 1st Gen (C394) |
| Ford | S-Max | 2006 - 2014 | 1st Gen |
| Ford | Transit | 2006 - 2014 | MK7 |
| Ford | Transit Connect | 2002 - 2013 | MK1 |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Complete fitting kit to install a single Din head unit and retain the original steering wheel controls in Ford cars.
Package Includes
- Fascia Adaptor Panels
- Steering Wheel Control Interface
- Antenna Adaptor (ISO to DIN antenna adapter)
- Universal patch lead (Included)
Fascia Adaptor
This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.
Steering Control Adaptor
A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.
Steering wheel control interface and adapter cable to fit an aftermarket radio upgrade.
The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.
The steering wheel control interface is built in to the adapter cable. NOTE: Some cars do not have an ignition power supply in the original quadlock, these cars will require an ignition supply to be hardwired.
This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip and source buttons.
Patch lead to match the steering control interface to the new head unit.
Aerial Adaptor
An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.
FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.
