Complete fitting kit to install a Single DIN head unit into an Audi A2/A4/A6 car (with rear amplified standard Chorus or Concert radios) 

Package Includes

• Single Din Fascia (Matt Black)
• Audi ISO and Mini ISO Adaptor Harness For Rear Amplified Cars
• ISO to DIN Antenna Adaptor Lead With 12v Power
• Audi Radio Release Keys

This fitting kit is suitable for Audi vehicles that have amplified rear speakers. Not suitable for cars with Symphony or Bose systems.

For earlier Audi A4 cars please use fascia 50-107

For older Alpine head units an additional antenna adapter may be needed, part number 21-101

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

Audi ISO and Mini ISO Adaptor Harness For Rear Amplified Cars

ISO adapter harness for Audi cars with ISO and mini ISO connectors at the rear of the head unit.

The harness has a built in adapter to drop the rear speaker outputs from the new head unit to a low line level signal to work with the original amplifier in the car.

Some cars may have an ignition supply in the original harness, other cars may not and an ignition supply will need to be connected.

ISO to DIN Antenna Adaptor Lead With 12v Power Feed

Antenna adapter cable for  cars with ISO connectors that have amplified original antennas. This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by most car radio manufacturers.

It also provides a power feed to give 12v from the car radio to the cars amplified antenna.

Audi Radio Release Keys

Radio release keys for the removal of the original head unit in VW/Audi vehicles.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.