Radio adapter cable for Volkswagen vehicles with original Audio 5 (Sound 5) radios to allow the fitting of an aftermarket stereo upgrade.

The adapter cable is plug and play with a built in CANBus ignition interface so not hard wiring is required.

ISO radio adapter harness for Volkswagen cars with original Audio 5 (Sound 5) radios.

This adapter cable is designed to adapt from the original ISO wiring in the vehicle to standard aftermarket ISO wiring to allow the fitting of a new radio upgrade.

This lead has a built in CANBus interface which provides an ignition feed to the new stereo and also an illumination signal.
The CANBus interface is built into the adapter cable for a plug and play installation.

This adapter cable does not support steering wheel control functions.

Harness Adaptors

Connect the head unit to the original radio connector without the need to cut any of the existing wiring.

TECHNICAL NOTE

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

If in doubt please email us with your vehicle details and we will confirm what you require.

Please make sure that is the correct Wiring Harness for your car by firstly checking to see if your make, model and year of car is listed in the description. Secondly by checking to see if the Shape in the picture listed is the same as you have in your vehicle. We try to provide upto date information as possible. If you are unsure please contact our Customer Service and we will be happy to help you.