InCarTec

5 Inch Rear View Clip Over Mirror MonitorClip over rear view mirror monitor for reverse came display. 5 inch display screen.Below is an image of the fittings on the rear of the mirror..

Double Din fascia with cage GLOSS BLACK Designed for Fiat, Citroen and Peugeot vehicles facelift interior.The kit is designed to replace the metal cage which is normally supplied with the new head-unit. This fascia kit contains a metal cage, trim and all necessary fixings.{ vehicle_compatibi..

Replacement car audio fascia to enable you to change the original radio in the car to a Single or Double DIN aftermarket version This fascia kit has a removable pocket depending on the installation.Also has side fixing brackets so no radio cage kit is requiredFits Mazda RX-8 car models...

CANBUS interface for Fiat Chrysler Automobiles vehicles with the post 2014 large radio connector.This interface uses a vehicle specific connection to ISO connectors behind the radio to retain the use of the steering wheel controls and provide CANbus outputs as well as Ignition, speed pulse, reve..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical InformationSpeaker: 165 mm Panel cut out: 149 mm Outer diameter: 182.50 mm Ring height: 9 m..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single / Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fa..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Replacement car audio..

12V to 6V voltage converter for original reverse camerasCars original camera's are often powered by 6v or 8v power .This often comes from the original radio head-unit, so if this is removed to fit a new head-unit the camera will need a new 6v supply.If you use 12v you will often burn-out..

Cable to connect Toyota and Lexus cars  ( after  2005) with TOYOTA/PIONEER  original amplifiers  to to a aftermarket car radio using phono line output from the radio.Check that the connector matches the one on the back of your original radio.( For steering controls use item 2..

Provide a sound upgrade to your Abarth, Citroen, Fiat or Vauxhall front or rear doors with our 165mm (6.5 inch) speaker upgrade fitting kit.This kit fits various Abarth, Citroen, Fiat, Holden, Iveco, Peugeot and Vauxhall vehicle models. Please see our compatibility list for more cars that can be..

CANbus steering wheel control interface for Iveco Daily 2014 onwards with Delphi DAB original head unit and Fiat Ducato 2021 onwards with ISO connections and CAN steering wheel controls.This interface uses ISO connectors behind the radio to retain the use of the steering wheel controls and provi..

Allows you retain the original OEM camera on Toyota Aygo, Peugeot 108 and Citroen C1Comes complete with 12v-6v voltage dropper built in, can simply be connected into the ISO harness for power.Suitable for original head units with 4 pin camera connector. Will only fit cars with 4 pin camera c..

Steering wheel control interface and adapter cable designed for select Hyundai vehicles with SPDIF digitally amplified audio system. (24 and 18 PIN connections)Allows you to retain the use of the audio steering control buttons when upgrading to an aftermarket head unit. This interface a..

Speaker adapter cables;  used to connect after market speakers to the original loom on multiple Skoda models built after 2013, including models with Canton soundMay not fit all speakers on all versions of every vehicle. Some vehicles have mi-range speakers or tweeters with different connect..

A pair of rear side panel car speaker adapter panels for 100-120mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 100 - 120 mm Installation cutout: 91.5 mm + 112.5 mm Ring outside: ..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Speaker adapter cables;  used to connect after market speakers to the original loom on Tesla vehicles.Suitable for cars with original standard or premium sound packs.May not fit all speakers on all versions of every vehicle. Please check your original speaker connections match the pictu..

Provide a sound upgrade to your Abarth/ Fiat 500 (2008-2016) rear side hatch speakers with our 165mm (6.5 inch) BLAM EXPRESS 165EC coaxial speaker upgrade fitting kit. Each fitting kit contains a set of BLAM EXPRESS 165EC 165mm (6.5inch) Hi-efficiency 2ohm Coaxial speakers.This Coaxial sp..

ISO adapter harness for Abarth, Alfa Romeo, Citroen, Fiat, Peugeot and Vauxhall cars with the new style connector. Use to install an after market head unit.New style connector to standard ISO connectors.Harness AdaptorsConnect the head unit to the original radio connector without the nee..

Reverse Gear Car Radio Mute Relay CableSpecial relay to mute audio when reversing to allow parking tones to be heard clearly.This relay is designed for aftermarket radio fittings where a parking sensor retention interface has been fitted. This relay will use a positive reverse gear signal t..