InCarTec

BMW Quadlock to ISO T cable for cars 2005 onwards without Ignition supply in the radio connector. Includes 24 x throughput wires to ensure that it will fit any BMW modelThis cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit.This cable fits behind the ..

Complete stereo upgrade fitting kit to install a Single or Double DIN aftermarket radio and retain the use of the steering wheel controls in Honda CR-V (2007-2011) car models (WITH ORIGINAL TYPE 2VNO NAVIGATION RADIO AND SUBWOOFER)Package IncludesFascia With Brackets and Pocket Steering..

4 channel High level ISO to Low Level RCA adapterConverts speaker outputs to low level RCA/PHONO .Ideal for connecting radios that do not  have pre outs or radios that have low voltage pre outs. To amplifiers.Also includes ground loop isolators to prevent interference .Has outpu..

Steering wheel control interface and adapter cable for Volkswagen, Seat and Skoda cars to fit an aftermarket radio upgrade.The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. ..

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unitThis interface includes PHONE commands for compatible Bluetooth head-units.Some model Kia and Hyundai c..

Complete stereo upgrade kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in Abarth and Fiat 500 (2008-2016) car models.Package IncludesSingle Din Car Audio Fascia Adaptor Panel (MATT BLACK) CANBUS Steering Wheel Control Interface ISO Connec..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit and retain the use of the factory steering wheel controls on Citroen C1, Peugeot 108 and Toyota Aygo car models. This fitting kit will also retain the factory USB and AUX functions (if vehicle is equipped) ..

Cable to convert Citroen/ Fiat/ Peugeot & Toyota cars with Quadlock connector to a European car radio with ISO connectors.This cable has a loose wire for connecting to an ignition source in the car as their is no traditional + 12v key in ignition supply behind radio. The car has CAN bus data..

Steering wheel control interface and radio adapter cable for Nissan X-Trail, Almera and Terrano cars, with 16 and 8 pin connectors, to fit an aftermarket radio upgrade.The cable adapts from the Nissan 16 and 8 pin connectors in the car to standard aftermarket ISO connectors. This replaces the ne..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataSpeaker: 165mm Panel cut out: 144mm Outer diameter: 164 / 163.8mm Ring height: 21.6mm ..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unitThis interface will retain the use of the steering wheel audio controls with an aftermarket he..

Special rear camera for Peugeot Expert, Citroen Dispatch and Toyota ProAce vehicles from 2016 onward. Replaces the rear high level brake light.12v power Colour CMOS image, NTSC. 150° View Angle IP68 Waterproof Includes power cable and 10 meter video cableAn additional inte..

ISO adapter harness for Audi A3, A4, A6 and TT cars with original BOSE amplified audio systems.This harness adapts from the original ISO and Mini ISO connectors at the back of the head unit to standard aftermarket ISO connectors. The harness has a built in high to low level audio adapter to drop..

Transform your Mini (R55, R56, R57, R58, R59) with this complete single or double DIN stereo upgrade kit. Designed for Mini Clubman 1st Gen (2007–2014), Mini Hatch & Convertible 2nd Gen, and Mini Coupe & Roadster, this kit allows you to install modern head units with either single or d..

Subaru cars made after 2007 with newer style connector.  Plug and Play cable to connect the  cars harness  to an after-market European car radio with ISO style connectors. Provides power and speaker connectionsfor cars with steering controls use item 29-672  or 29-686..

Car radio fascia adapter panel to allow the fitting of an aftermarket single or double din car radio upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.This fascia come with its own mounting b..

This cable is for extending the speaker ISO cable on a hands free SOT lead or on a car audio head-unit. If it is used for extending a SOT lead to the rear of a car, you will need two items to bring audio to the front and then back again.2.5m speaker ISO cable extension cable. 8 way brown connect..

Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units.NOT COMPATIBLE WITH CHINESE 2WIRE SWC HEAD-UNITS  use 49-000 for theseThis cable plugs into the ICT control box and connect..

Recoil Level 3-Series RLX65 6.5 inch (165mm) 2-way full-range Coaxial SpeakersBoost your car’s sound with the RecoIL Audio RLX65 Level-3 Series 6.5-inch coaxial speaker system. Featuring a high-strength pressed paper cone, PEI dome tweeter with Neodymium magnet, nitrile rubber surround, an..

Replacement car audio radio fascia to enable you to change the original radio in the car for an "L shaped Single DIN chassis" with a chassis at the lower end (e.g. Alpine ILX705D) or for 6.8 inch modular aftermarket head units like (e.g. Pioneer EV062 or EVO64)The fascia uses side fixi..