InCarTec

A pair of speaker adapter cables for various Abarth, Fiat, Ford, Mazda and Jaguar vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, or Bow..

3 Metre Male To Female Fakra Antenna Extension Cable3 metre male to female Fakra antenna cable extension. With water blue universal Fakra cable.Used to extend the fakra connector when fitted at the rear of a car...

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 144 mm Height: 42 mmPlease make sure tha..

CANbus steering wheel control interface for Abarth, Alfa Romeo, Chrysler, Citroen, Fiat, Ford, Iveco, Lancia, Peugeot & Vauxhall vehicles with older style ISO connections.This interface uses ISO connectors behind the radio to retain the use of the steering wheel controls and provide CANbus o..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

A pair of ISO standard speaker adapter cables for various Abarth, Alfa Romeo, Audi, Citroen, Chrysler, Fiat, Holden, Iveco, Jaguar, Lancia, Peugeot, Porsche, Seat, Skoda, Renault, Vauxhall, Volkswagen And Volvo car vehicle models.Use to fit new aftermarket speakers without needing to cut off the..

GM Cars Single/Double DIN car audio fascia adapter panel to enable you to change the original radio in the car to a double din aftermarket version172mm x 98mmReplaces GM Delco oversize radio.This fascia kit has fixing brackets so no cage kit is needed.An additional pocket is included..

Provide a full sound upgrade to your Renault front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Dacia, Fiat, Mitsubishi, Nissan, Renault, Vauxhall vehicles including. Please see our compatibility list for more cars that can benefit from this upg..

SOT harness for Abarth, Fiat, Alfa Romeo, Citroen, Jeep, Lancia, Peugeot, Vauxhall cars that have the new style large connector at the back of the radio. Use this harness to install an aftermarket handsfree kit to your vehicle.This cable fits behind the car radio and is used as a break-..

ISO T cable for some Hyundai, Kia & Ssangyong carsThis cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting handsfree car kits.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-fr..

Use this cable to retain an original fitment camera when fitting a new head unit.For General Motors (GM), Chevrolet, Cadillac, and GMC cars and trucks with original equipment navigation and reverse camera which use a 20 pin plug. Check vehicle before ordering for this plug, cars within these yea..

Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in select Mercedes vehicles with factory fitted Comand APS NTG2.5 systems and Quadlock Connection.Package IncludesSingle Din Car Audio Fascia Adaptor Steering ..

Car radio fascia adapter panel to allow the fitting of an aftermarket single/ double DIN car stereo upgrade. Fits Citroen C Crosser (2007-2012) and Peugeot 4007 (2007-2012) car models This kit comes complete with a pocket and trim for Single DIN Installations.COLOUR: BLACKCut out bar and..

50cm Female Fakra to Female Fakra In Car Radio Antenna Extension CableThis 0.5m aerial extension can be used to extend the Fakra connector when fitted at the rear of a vehicle.It has a female Fakra connector at one end and a female Fakra connector at the opposite end...

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

A pair of speaker adapter cables for various Fiat Ulysse, Lancia Phedra and Zeta vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see ..

A pair of front door car speaker adapter panels for 200mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 200 mm Installation cutout: 182 mm Height: 44 mmPlease make sure tha..

A pair of rear side hatch car speaker adapter panels for 165mm speakers.  These panels allow you replace the cars original speakers with new improved quality aftermarket speakers. Fits various models of Abarth, Chrysler, Fiat and Lancia cars. Please make sure that is the correct Speake..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.This kit comes with s..