InCarTec

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you to add quality aftermarket speakers to the vehicle.Technical DataLoudspeaker: 165 mm Installation cutout: 145.5 mm Ring outside: 234.5 mm x 208 mm Ring height: 21.2 mm - 32 mm..

Interface to retain the audio steering wheel controls (including phone button) in a Volkswagen car and also retain parking sensor and climate control display which is normally displayed on the CDR510 radio. The PDC and climate info is shown on the cars central display between the clocks, DOES NOT PU..

Complete fitting kit to change the original radio in a Mercedes CLK (C209) facelift (2005-2009) vehicle for a Single DIN after market unit.Package IncludesSingle Din Fascia (Matt Black) Steering Control Interface Adaptor Fakra to Din Antenna Adaptor Universal patch lead (Included) ..

Double Fakra Aerial adapter cable for European cars that have twin non amplified original antennas.This cable converts the cars existing Twin fakra aerial plug to an aftermarket DIN type used by most car radio manufacturers.For Alpine Radios use item 21-101 to convert the DIN end to ISO. ..

Complete stereo upgrade fitting kit to install a Single or Double Din aftermarket car stereo radio and retain the use of the steering wheel audio controls in select Nissan 350Z car models with standard audio systems.Package IncludesSingle / Double Din Fascia Adaptor - Matt Black Steerin..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.Suitable for Holden Barina, Captiva, Epica car models with the new GM style c..

Car radio iso lead for Hyundai and Kia cars with Amplifier fitted under drivers seat.This connector has two sizes of pinsConnects the new radio to the cars original connector{ vehicle_compatibility }Harness AdaptorsConnect the head unit to the original radio connector without the..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. Suit..

A pair of Speaker Grills with removable mesh for 130mm (5 inch) speakersSold As A Pair..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket version Fits Skoda Fabia Mk2, Roomster with original BEAT radio only COLOUR: MATT BLACKBelow is an example of a BEAT radio for which this fascia replacesCar Audio Fitting Ac..

Provide a full sound upgrade to your Toyota front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Toyota vehicles including Alphard, Auris, Avensis, Hilux, RAV4 and Lexus RX, Daihatsu, Scion, Subaru. Please see our compatibility list for more cars ..

Seal adapter to fit DAB Shark Fin antenna to VW and Audi carsRubber adapter seal to fit the 70-917 DAB shark fin antenna to Audi and Volkswagen cars.Fits Audi A6 and VW Golf VII..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

ISO T cable for Ford Ranger & Mazda cars.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-free kit to play through the cars speakers.Use with Parrot CK3000, CK3100, CK3200 LS, MKI9000, MKI9100, MKI9200If using on BOSE cars use the..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Citroen Nemo, Peugeot Bipper or Fiat Fiorino/ Qubo vehicles.Package IncludesDouble Din Fascia Adaptor Double Din Metal Cage Kit (103mm high) Steering Wheel Contro..

Antenna Turn on for selected Mercedes radios with a quadlock connection Connect to back of the quadlock on Mercedes Audio 10,15 and 20 radio units to turn on the antenna.Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, ..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Upgrade your car's audio system without cutting or modifying factory wiring. The InCarTec 41-045 tweeter adapter cables are designed to connect aftermarket tweeters or small speakers directly to your vehicle’s OEM speaker harness – making installation clean, fast, and secure.Thes..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. 172m..