InCarTec 29-UC-050-CHR2 Lancia CANBUS Amplifier Turn On And Steering Wheel Control Interface
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: 29-UC-050-CHR2
- EAN: 7427282736237
- Warranty: 2 Years Warranty
Available Options
Description
Product Compatibility Chart
| Make | Model | Years | Notes |
| Lancia | Voyager | 2011 - 2016 |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
CANbus steering control and Amplifier Turn On interface for Chrysler, Dodge and Jeep vehicles.
This interface switches on the original amplifier, retains the use of the steering wheel controls and gives speed pulse, handbrake and reverse gear CAN outputs.
The CANbus interface retains the use of the original audio controls on the steering wheel with an after market head unit.
The interface also switches on the original amplifier in the car via a CANbus turn on signal.
Gives out speed pulse, reverse gear and handbrake CANbus signals.
What's Included
- 29-UC-050-CHR2 Steering Control Adaptor
- Stereo Patch Lead
You have a choice from the following patch leads
- Alpine
- Clarion
- JVC
- Kenwood
- Pioneer
- Sony
- China Units
Patch lead INCLUDED for the steering controls depending on the make of radio being fitted.
| Radio Being Fitted | Part Number | Short Description |
| Resistive Programming (Loose Wire) | 29-UCCAB-000 | Loose wire Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Alpine | 29-UCCAB-001 | Patch lead for 29-UC Series Steering wheel control for Alpine stereo. |
| Clarion/ JVC | 29-UCCAB-003 | Patch lead for 29-UC Series Steering wheel control for Clarion/JVC stereos |
| Kenwood/ JVC (Single Wire) | 29-UCCAB-005 | Single Wire Patch lead for 29-UC Series Steering wheel control for Kenwood/JVC stereos |
| Pioneer/ Sony | 29-UCCAB-007 | Patch lead for 29-UC Series Steering wheel control for Pioneer/Sony stereos |
| Resistive Programming (3.5mm Jack) | 29-UCCAB-016 | 3.5mm Jack Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos |
| Universal | 29-UCCAB-SET | Patch lead set for 29-UC Series Steering wheel control for Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack. |
On some newer model cars the blind spot detection feature will not operate when the original head unit is removed, there is no solution for this at the moment.
TECHNICAL NOTE:
- CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
- SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.
IMPORTANT NOTE
- China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
- Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.
We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.
