Car Audio Stereo Installation kit for installing a new after market Double Din headunit into your Honda CR-V Models. This is complete kit including Double Din Fascia , Steering Wheel Control Stalk Adaptor, Camera Retention Interface, and Antenna Adaptor

Package Includes

• Double Din Fascia (Matt Black)
• Steering Wheel Control Adaptor
• Camera Retention Interface
• Antenna Adaptor
• Stereo Patch Lead

Fascia Adaptor

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.

Fits Honda CR-V 4th Gen (2012-2017) car models Black rubber touch finish

Steering Wheel Interface

Interface to connect to the CAN ignition of EU models of the Honda Civic and CRV provide ignition output as well as interfacing with the steering wheel controls and amplifier.

This interface also includes subwoofer retention and a reverse signal, speed pulse and parking brake outputs.

Suitable for European models with original OEM navigation.

• Retains steering wheel controls (pre-programmed)
• Retains phone buttons (hard wired)
• CAN ignition output
• Reverse Output, Speed Pulse and Parking Brake Outputs
• Retains factory amplifier and subwoofer
• Retains ability to view clock
• Comes with patch lead included

Clock remains functional but manual clock setting will not be available. To change time, vehicle battery must be disconnected and then reconnected at 1:00 as this is the default time that the clock starts at. Disconnecting the battery permanently removes the date without factory head unit installed.

NOT SUITABLE for retaining steering wheel controls on Chinese/unbranded head units with 2 wire SWC interface (KEY1/KEY2) 

Instructions Manual

Aerial Adaptor

Honda Insight and other models made after 2009 car radio antenna adapter. 12v power supply cable. This cable converts the cars existing aerial plug to an aftermarket DIN type used by most car radio manufacturers.

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.

Camera Retention Interface

The camera retention interface allows you retain the original OEM camera on European models

Suitable for original head units with 7 pin Grey camera connectors.

PLEASE NOTE: designed for use with our steering wheel control interfaces with reverse trigger output.

Important Fascia: 

• The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare cases "modification"  may be  necessary or needed.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the shape & connection in the picture listed is the same as you have in your vehicle. If in doubt please Contact US with your vehicle details and we will confirm what you require.