Amplifier Fitting

A 2 Channel 80W adjustable high-to-low level subwoofer amplifier Line Output Converter (LOC) with a built-in amplifier remote trigger. This device is designed to convert 2 channels of speaker level audio into 2 channels of line level audio that can be used by car audio amplifiers.This interface ..

MOST fibre optic interface designed to retain the use of the original fibre optic amplifier in Porsche Boxster or 911 to allow the fitting of an aftermarket radio upgrade.The interface connects at the back of the radio, it takes the phono audio output from the new radio and converts it to a digi..

RECOIL Programmable Trigger Delay with Four Outputs.Recoil programmable sequencer ATT4 can be used to turn-on and turn-off couple amplifiers to eliminate any pop noises.This 4-channel adjustable remote output timer allows you to set up turn-on and turn-off times up to 30 seconds. The built-i..

ISO to ISO Amplifier Integration Interface4 channel adjustable ISO to ISO amplifier interface.Use to install a new radio in a car that has an original fit amplifier that takes a pre amplified audio feed.This interface converts the high level audio output of a new head unit to a low level..

D2B fibre optic interface designed to retain the use of the original fibre optic audio amplifier (Usually Bose systems in cars built between 1998 and 2005) in Mercedes cars to allow the fitting of an aftermarket radio upgrade.Comes with cable to connect power and D2B wakeup to connection for ori..

Amplifier bypass cable for Toyota Alphard AH10 with OEM Theatre Sound Amplifier. Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier which is under the passenger seat.Retains front and rear speakers including tweeters, centre speake..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Amplifier bypass cable for Land Rover Range Rover L322 (Vogue) cars that have an original DSP amplifier and high line original head unit. This cable extends from the dashboard to the amplifier in the rear and bypasses the amplifier to allow a new stereo to work with the original speakers in the car...

2 Channel Line Out Converter With AccubassThe LC2i PRO join ranks with AudioControl’s most popular active line output converter, the LC2i. Adding a sub? Planning a full system? Either way, get the best possible signal from your factory sound system to your amplifiers. Load selection switch..

Amplifier bypass cable for Kia and Hyundai  models with digital amplifier under the passenger seat . Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier. NO INSTRUCTIONS are included on amplifier location. Cars with amplifiers in ..

Amplifier bypass cable for Porsche cars built between 2004 and 2013 with PCM 2.0 and BOSE. Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier which is under the front seat while retaining the original subwoofer and its dedicated amplif..

D2B fibre optic interface designed to retain the use of the original fibre optic audio amplifier (Usually Bose systems in cars built between 1998 and 2005) in Mercedes cars to allow the fitting of an aftermarket radio upgrade.The interface connects at the back of the radio, it takes the phono au..

ISO Harness CableThe Focal Inside IW IMP 2.1 car radio adapter cable is designed for the IMPULSE 4.320 four-channel digital amplifier. Without modifying the original wiring,it allows easy connection of the two-channel front amplifier and a PSB 200 subwoofer (two bridged channels).Designe..

IW IMP 2.2 ISO Cable HarnessThe Focal Inside IW IMP 2.2 car radio car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the IMPULSE 4.320 to be easily connected to two front channels and two ISUB Twin subwoofers without changing the ori..

6 Channel Line Out Converter With ACCUBassAudioControl brings you our most advanced line of LOCs yet. OEM integration has never been easier with the host of intelligent built-in features like LMC™ (Load Matching Circuit), allowing even the most finicky factory sound systems to no longer be..

Amplifier bypass cable for BMW X5 cars that have an original DSP amplifier. This cable extends from the dashboard to the amplifier in the rear and bypasses the amplifier to allow a new stereo to work with the original speakers in the car. Adaptor cable to bypass the original DSP amplifier i..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

D2B fibre optic interface designed to retain the use of the original fibre optic audio amplifier (Usually Bose systems in cars built between 1998 and 2005) in Mercedes cars to allow the fitting of an aftermarket radio upgrade.The interface connects at the back of the radio, it takes the phono au..

Amplifier bypass cable for Toyota Alphard and Vellfire (AH20) with OEM amplified navigation system. Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier which is under the front seat.After bypassing the amplifier the subwoofer, speak..

Recoil 4-Channel 80W adjustable high-to-low level subwoofer amplifier Line Output Converter (LOC) with a built-in amplifier remote trigger. This device is designed to convert 4 channels of speaker level audio into 4 channels of line level audio that can be used by car audio amplifiers.This inter..