49-MB-02 Mercedes Steering Wheel Control Interface Stalk Adaptor
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: 49-MB-02
- EAN: 7427282686501
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
| Make | Model | Years | Notes |
| Mercedes-Benz | A Class | 2005 - 2011 | (2nd Gen) W169 |
| Mercedes-Benz | B Class | 2005 - 2011 | (1st Gen) W245 |
| Mercedes-Benz | C Class | 2004 - 2007 | (2nd Gen) W203 Facelift |
| Mercedes-Benz | CL | 2000 - 2006 | (2nd Gen) C215 |
| Mercedes-Benz | CLC | 2008 - 2011 | (CL203) |
| Mercedes-Benz | CLK | 2005 - 2009 | (C209) facelift |
| Mercedes-Benz | CLS | 2005 - 2010 | 1st Gen (W219) |
| Mercedes-Benz | G Class | 1997 - 2011 | |
| Mercedes-Benz | G Class | 2012 - 2018 | |
| Mercedes-Benz | M Class | 2005 - 2010 | (W164) |
| Mercedes-Benz | M Class | 2011 - 2019 | (W166) |
| Mercedes-Benz | R Class | 2006 - 2012 | (V251) |
| Mercedes-Benz | SLK | 2009 - 2011 | (R171) facelift |
| Mercedes-Benz | Sprinter | 2007 - 2018 | (W906) NCV3 |
| Mercedes-Benz | Viano | 2004 - 2014 | (W639) |
| Mercedes-Benz | Vito | 2003 - 2014 | 2nd Gen (W639) |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Steering wheel control interface and adapter cable for various Mercedes cars to fit an aftermarket radio upgrade.
The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.
The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation.
This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip and phone buttons. Note; the operation of these buttons can be dependent on the vehicle spec and radio compatibility.
The CANbus interface will also provide ignition, illumination, speed pulse, hand brake and reverse gear output signals to the new radio.
This interface needs to be used with a 49- series patch lead. This links the steering control interface to the steering wheel control input on the back of the new stereo.
What's Included
- 49-MB-02 Steering Control Adaptor
- Stereo Patch Lead
Works with the following brands
- Alpine
- Clarion
- JVC
- Kenwood
- Pioneer
- Sony
FOR CHINA UNITS YOU WILL NEED 49-000
PATCH LEAD INCLUDED FOR MOST BRANDED RADIOS
CHINA UNBRANDED RADIO MAY REQUIRE ADDITIONAL PATCH LEAD AT ADDITIONAL COST
TECHNICAL NOTE:
- CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
- SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.
IMPORTANT NOTE
- China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
- Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.
We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.
