Product Compatibility Chart
|Jeep||Cherokee||2008 - 2012||KK|
|Jeep||Compass||2011 - 2017||1st Gen, Facelift|
|Jeep||Grand Cherokee||2005 - 2013||3rd/4th Gen|
|Jeep||Patriot||2007 - 2013||MK74|
|Jeep||Wrangler||2007 - 2012||JK|
Connection: OEM Specific
The CT51-CH03 is an amplifier bypass wiring harness for use in a variety of Chrysler, Dodge and Jeep vehicles (for full model list please view Product Applications). This lead allows you to simply wire and install an aftermarket radio into specific vehicles. The lead helps establish a connection to the radios pre-existing speakers whilst bypassing the cars original amplifier. This harness also includes built-in crossovers.
When connected your new stereo may not power up, and this is no fault of the wiring harness purchased.
Audi / VW / Skoda / Fiat and other vehicles tend not to have an ignition switched live feed.
In these cases it is necessary to manually connect a spurred live feed from fuse box for example to feed switched power so the new stereo turns on and off with the key.
The wire in particular on the new wiring harness will be the red wire.
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.
Please make sure that is the correct Active System Adaptor for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.