Seat Leon MK2 2005-2012 Double Din Car Stereo Fitting Kit Fascia, Wiring ISO, Aerial, Keys
- Stock Status: Out Of Stock
- Item Condition : New
- Available QTY : 0
- Brand: Dynamic Sounds
- Model: FKIT-SEAT-06
- EAN: 3777301571412
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
Make | Model | Years | Notes |
Seat | Leon | 2005 - 2012 |
There is no ignition switched 12v supply so you will require to connect that wire to install the aftermarket stereo. Also the blue wire on the aerial adaptor connects to the blue/white wire (aerial rem) on the back of the stereo.
Vehicles With Single FAKRA Antenna Connector, Connection: Quadlock (Fakra)
Double Din Radio Replacement Kit allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. The kit includes double din fascia, ISO Wiring Harness, Aerial connections and Removal Keys.
Package Includes
- Double Din Fascia Adaptor (Dark Grey) Frame Only
- ISO Wiring Harness
- Stereo Removal Keys
Fascia Adaptor
This adaptor will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.
Wiring Harness
The wiring harness will allow to install the stereo. This adapter is required when replacing your factory fitted radio with an aftermarket radio. It will convert the original vehicle power & speaker wiring connectors to a standard ISO connector. Simply plug one end of the adapter into your cars wiring harness and the other into your new radio. *For Aftermarket Radio With DIN Antenna Connector*
Please Note
- Red wire has to be connected to a separate ignition feed in the vehicle to make aftermarket head unit to power up
- Orange cable requires connection to illumination wire but only if the radio requires this for dimming purposes at night.
- Blue wire needs to be connected to the Remote Antenna or ignition supply wire (if rem ant wire not available) on back of car stereo.
Please Note
- When connected your new stereo may not power up, and this is no fault of the wiring harness purchased.
- Audi / VW / Skoda / Fiat and other vehicles tend not to have an ignition switched live feed.
- In these cases it is necessary to manually connect a spurred live feed from fuse box for example to feed switched power so the new stereo turns on and off with the key.
- The wire in particular on the new wiring harness will be the red wire.
Stereo Removal Keys
Stereo Removal Keys to remove headunit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units you will require a manufacturer specific stereo removal key to prevent damage to the head unit or the surrounding fascia and cage.
Important Fascia Notes
- China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
- We do not take any responsibility for China units not fitting as they are not industry standard size.
- If the cage supplied with the stereo does not fit the fascia then you must purchase a universal cage which is slightly smaller.
- Click here for CT23UN01 UNIVERSAL Mounting Cage
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.