Seat Alhambra 2010 - 2020 JL Audio 6.5" 2 Way Car Front Door Speaker Upgrade Kit With Sound Deadening Sheet
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 6
- Brand: JL Audio
- Model: C1-650x + SFKU-VW01-165 + RKXSK
- EAN: 7427307029245
- Warranty: 1 Year Warranty
Description
Package Includes:
- JL Audio C1-650x 6.5" 16.5cm 2 Way Yellow Cone Car Speakers
- 165mm Speaker Adaptor Panels
- Speaker Adaptor Cable Harness
- Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit
Product Compatibility Chart
| Make | Model | Years | Notes |
| SEAT | Alhambra | 2010 - 2020 | Mk2 (7N) |
165mm Speaker Adaptor Panels (40-1033-165)
Factory fitted speakers often have a shape that does not conform to the DIN standard. Our Speaker adapter panels are designed to line up with the original mounting holes fit behind the door cards of various VW group vehicles to allow you to change to new improved quality 165mm aftermarket speakers quickly and with little effort.
Additionally pre-made holes means they can also fit a variety of different brands of speakers for simple installation.
Speaker Adaptor Cable Harness (41-009)
A pair of ISO standard speaker adapter cables for VW Group (Seat, Skoda, Volkswagen) vehicle models from 1996 onwards.
Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.
May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, or Bowers and Wilkens or Harman Karon have different speakers with different connections. Please check your original speaker connections match the picture before purchasing.
C1-650x
Coaxial Speaker System: 6.5-inch (165 mm) Woofer, 0.75-inch (19 mm) Aluminum Dome Tweeter
C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.
To facilitate fit, multi-application adaptor rings are included with the C1-650x allowing easy, drop-in installation in vehicles equipped with oversized 6.5-inch and 6.75-inch speaker openings. Without the ring, the speaker will fit into many "6-inch" speaker locations as well.
C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-650x is a proprietary, stamped, steel 6.50-inch (165 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control the voice coil's motion. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.
Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.
When it comes to value, C1 is the real deal!
General Specifications
- Continuous Power Handling (RMS) 50 W
- Recommended Amplifier Power (RMS) 10 - 75 W / Ch.
- System Efficiency 90.5 dB @ 1 W / 1 m
- System Nominal Impedance 4 Ω
- System Frequency Response 48 Hz - 24 KHz ± 3 dB
Coaxial Physical Specifications
- Frame Outer Diameter* (A) 6.25 in / 159 mm
- Grille Tray Outer Diameter (B) N/A
- Motor Outer Diameter (C) 3.15 in / 80 mm
- Frontal Coaxial Tweeter Protrusion** (D) 0.72 in / 18 mm
- Frontal Grille Protrusion (E) N/A
- Mounting Hole Diameter (F) 5.02 in / 128 mm
- Mounting Depth (G) 2.07 in / 53 mm
*Does not take into account mounting tabs
**Frontal coaxial tweeter protrusion measured from mounting surface
Sold As A Pair, Grilles Not Available.
Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit
- Expert level sound dampening
- Aluminum outer layer
- Self adhesive
- Easy installation
- Use on all metal panels, doors, roof, floor, firewall & trunk
- Kills panel resonance, squeaks and rattles
- Highest damping vs. weight ratio of any material available
- Improves overall audio frequency response and bass output
- Speaker kit
Expert RoadKill Published Specifications
- Minimum Thickness 0.080in
- Minimum Weight 0.65bs/ft2
- Aluminum Layer- 6 mils
