Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Hyundai i20 car models WITH A STANDARD FACTORY RADIOThis fitting kit is suitable for Hyundai I20 models with a standard factory fitted radio and steering wheel controls.

Some models of Hyundai i20 have a dashboard design that is outwardly the same, but the internal fixing clips are not the same for the radio fascia. We do not have an alternative fascia for these cars, and modifications to the fixing clips on this fascia will need to be made to fit these vehicles.

For Single DIN installation an additional pocket is required 

For vehicles without steering wheel controls and basic radio please use FK-986

Package Includes

• Double Din Fascia with brackets (Matt Black)
• Steering Wheel Control Interface
• Antenna Adaptor
• Universal patch lead (Included)

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia comes with side fixing brackets so no additional fitting cage is required

Steering Control Adaptor

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. 

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unit. This interface includes PHONE commands for compatible Bluetooth head-units.

Some model Hyundai cars have original fit amplifiers. If the car has the original fit amplifier it will often have ISO connectors, the amplifier is a digital switch on and will need to be bypassed. This interface is not suitable for cars with an original amplifier.

Antenna Adaptor

Radio antenna cable adapter for converting the original car radio plug to use with aftermarket head units. This cable converts the car radios existing aerial plug to an aftermarket DIN type used by most car radio manufacturers.

Universal Patch Lead

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit.
Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

Important Fascia Notes

• The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.