This Double DIN stereo upgrade fitting kit is designed for selected Nissan Juke Visia 2014-2019 models fitted with the original CD/MP3 radio. It provides the core parts needed to replace the factory stereo with an aftermarket Double DIN head unit while keeping the installation neat and vehicle-specific. The fascia panel is designed specifically for the Nissan Juke facelift model range and is finished in gloss black to match the dashboard more closely.

The kit includes a Nissan 20-pin ISO lead that adapts the original Nissan connector to standard aftermarket ISO connectors and includes the power and speaker supply, removing the need for separate basic wiring adaptation. It also includes the Nissan grey rectangle to male DIN antenna adapter, which converts the original antenna connection for the new stereo. The adapter’s blue wire must be connected to the radio’s antenna turn-on output so the original antenna amplifier is powered correctly.

Package Includes

• Double Din Fascia With Bracket (Gloss Black)
• Radio ISO Adapter Cable
• Rectangle to Din Car Aerial Antenna Adaptor Cable

This fitting kit is only compatible with Nissan Juke Visia models where there are no steering wheel audio controls present.

Fascia Adaptor

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia includes side fixing brackets so no fitting cage is required 

Fits Nissan Juke (2014 - 2019) car models, these facelift models have wider original radios compared to the pre facelift cars.

COLOUR: GLOSS BLACK

PLEASE NOTE: For Single DIN installation you will require an additional pocket

Radio ISO Adapter Cable

Nissan radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 20 pin Nissan connector to standard aftermarket ISO connectors.

This cable includes the power and speaker supply.

Rectangle to Din Car Aerial Antenna Adaptor Cable

Nissan grey rectangle female antenna connector to male DIN car aerial antenna adapter cable. This cable adapts from the grey plastic rectangle Nissan antenna connector in the car to a standard aftermarket male DIN connector, this is used when fitting a new aftermarket stereo.

The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo. The phantom power feed terminates in a male bullet connector to make the phantom power lead easier to connect to ISO cables and steering wheel control interfaces with a female bullet connection for the electric antenna turn on. This antenna adapter also comes with a spare female bullet connector or T-Tap connection to connect directly into the electric antenna turn on.

Important Fascia: 

• The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare cases "modification"  may be  necessary or needed.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the shape & connection in the picture listed is the same as you have in your vehicle. If in doubt please Contact US with your vehicle details and we will confirm what you require.