Complete fitting kit to change the original radio in a Discovery 3 or a Range Rover Sport with original Harman/Kardon amplified audio system (not LOGIC7 system) and without the touch screen navigation for a Double DIN after market head unit.

Package Includes

• Double Din Fascia With Cage (Matt Black)
• Steering Control Interface Adaptor
• Antenna Adaptor
• Amplifier Bypass Cable
• Universal patch lead (Included)

This kit is for vehicles with the Harman/Kardon audio system and without touch screen NAV, THIS WILL NOT FIT VEHICLES WITH THE HARMAN/KARDON LOGIC 7 AUDIO SYSTEM

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

Steering Control Adaptor

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. 

Discovery 3 and Range Rover Sport with Harmon Kardon (WITHOUT TOP DISPLAY) Car Audio Steering wheel interface and iso connectors allowing use of original buttons with a new aftermarket head-unit.

If your car has an amplified speaker system you will need to bypass the amplifier located in the drivers side rear quarter panel or under the driver's seat. 

NOT SUITABLE FOR CARS WITH ORIGINAL ALPINE PREMIUM SOUND SYSTEM OR HARMAN/KARDON LOGIC 7 AMPLIFIED SYSTEMS

Aerial Adaptor

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.  

Amplifier Bypass Cable

Amplifier bypass cable for Range Rover Sport and Discovery III cars fitted with standard Harman/Kardon amplifier underneath the driver's seat. Allows you to connect a new aftermarket radio directly to the car's speakers after bypassing the original amplifier. A new extra amplifier will be needed to keep the original sub-woofer. Sound to tweeters may be lost.

Universal Patch Lead

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the ICT control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. This item has loose wires and leads so it can be configured to suit the brand of radio being fitted.

This kit is for vehicles with the Harman/Kardon audio system, THIS WILL NOT FIT VEHICLES WITH THE HARMAN/KARDON LOGIC 7 AUDIO SYSTEM
This kit can be used on models with the separate navigation touchsceen however it does not retain the use of this screen.

Important Fascia Notes

• The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.