Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Nissan Elgrand E51 vehicles (WITH STANDARD AUDIO)

This fitting kit is suitable for Nissan Elgrand models with a separate Hazard Switch and THEATRE SOUND audio. The Theatre Speaker System will have a centre TOP dashboard speaker grille with NO LOGO.

Package Includes

• Double DIN Fascia Adaptor (Matt Black)
• Steering Control Interface
• Theatre Sound Amplifier Bypass Cable
• Antenna Adaptor
• Universal patch lead (Included)

Use the metal brackets from the original radio and fit to the new aftermarket radio

This fitting kit is suitable for Nissan Elgrand models with a separate Hazard Switch and THEATRE SOUND audio. The Theatre Speaker System will have a centre TOP dashboard speaker grille with NO LOGO (See below)

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

Steering Control Adaptor

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. 

Aerial Adaptor

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.  

Theatre Sound Amplifier Bypass Cable

Amplifier bypass cable for Nissan Elgrand E51 2002 - 2010 with original 5.1 Theatre Sound

Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier which is under the front seat.

After bypassing the amplifier the subwoofer, speakers in the rear tailgate and centre speaker will no longer function.

Comes with a 2.5m speaker extension to extend from the radio to the subwoofer under the front seat.

Universal Patch Lead

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the ICT control box and connects to the 3.5mm socket or single wire on the back of the new head-unit.
This item has loose wires and leads so it can be configured to suit the brand of radio being fitted.

Important Fascia Notes

• The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.