Complete stereo upgrade fitting kit to install a Single DIN aftermarket car stereo head unit and retain the use of the factory steering wheel controls on Citroen C1, Peugeot 108 and Toyota Aygo car models.This fitting kit will also retain the factory USB and AUX functions (if vehicle is equipped)

Package Includes

• Single Din Fascia (ANTHRACITE)
• Steering Control Interface
• Aerial Antenna Adaptor
• USB Retention Cable
• Universal patch lead (Included)

Fascia Adaptor

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

Steering Control Adaptor

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. 

Steering wheel control interface and adapter cable Citroen C1, Peugeot 108 and Toyota Aygo cars 2014 onwards

The interface and radio adapter cable is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, source and phone buttons from the steering wheel with the new radio.

The cable also provides a speed pulse (for GPS) reverse output (for an aftermarket reverse camera) and handbrake output signal to the new stereo. The AUX 3.5mm jack below the original radio is retained with this interface by connecting the left and right inputs (2 RCAs) found on the back of most double DIN aftermarket radios that don't feature an AUX jack on the front panel. The USB can be retained with part 24-250.

The cable adapts from the connectors in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.

The interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source and phone buttons.

USB Retention Cable 

Allows you to maintain the cars existing USB socket and use it with a new aftermarket head-unit.

This unit uses the cars original housing. Works on all newer model Citroen, Peugeot and Toyota Aygo cars that have an original USB socket.

Aerial Adaptor

This cable adapts from the antenna connection at the back of the cars original radio to a standard aftermarket male DIN antenna connection to allow the fitting of an aftermarket radio upgrade.

The connector is rectangular with a round antenna terminal inside. The antenna adapter has a loose blue wire, this needs to be connected to the antenna turn on output on the new stereo. This will turn on the original antenna amplifier in the car..

Only suitable for 1-DIN radios with a maximum installation depth of 100mm / 150mm including plug

For vehicles without steering wheel controls please use FK-651 (Piano Black) or FK-652 (Anthracite)

Universal Patch Lead 

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit.

Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.