Complete stereo upgrade kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in Abarth and Fiat 500 (2008-2016) car models.

Package Includes

• Single Din Car Audio Fascia Adaptor Panel (PEARL BEIGE)
• CANBUS Steering Wheel Control Interface ISO Connections
• Antenna Adaptor Lead with 12v Power Feed
• Universal patch lead (Included)

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

Steering Control Adaptor

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. 

CANBUS steering wheel control interface for Alfa Romeo and Fiat vehicles with older style ISO connections.

This interface uses ISO connectors behind the radio to retain the use of the steering wheel controls and provide CANbus outputs. Stops original display flashing once the correct settings have been made.

THIS IS NOT A DIY PRODUCT! It should only be fitted be experienced 12V engineers.

This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

Antenna Adaptor Lead With 12v Power Feed

Antenna adapter cable for  cars with ISO connectors that have amplified original antennas. This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by most car radio manufacturers.

It also provides a power feed to give 12v from the car radio to the cars amplified antenna.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.