Complete stereo upgrade kit to install an aftermarket Single DIN head unit Audi TT (8N) (1998-2006) with half or fully amplified sound systems

Package Includes:

• Single Din Fascia Panel
• ISO Radio Adaptor Harness with CANBus Ignition For Amplified Cars
• ISO to DIN Antenna Adaptor Lead with 12v Power
• Audi Radio Release Keys

Most early model Audi TT cars do not have an ignition signal on the CANBus data, the interface supplied in this kit will not generate an ignition supply on these earlier models.

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

Wiring Harness

ISO adapter harness for Audi A3, A4, A6 and TT cars with original BOSE amplified audio systems.

This harness adapts from the original ISO and Mini ISO connectors at the back of the head unit to standard aftermarket ISO connectors. The harness has a built in high to low level audio adapter to drop the speaker outputs from the new head unit to a low line level signal to work with the original amplifier in the car. The high to low level adapter has 4 dials to individually set the levels of each audio channel to give perfect sound quality.

The built in CANbus interface generates an ignition supply, this means installation.

Some early Audi TT cars will have CANbus wires at the back of the radio but do not carry the CANbus ignition data.

Aerial Adaptor

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. 

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.