Product Compatibility Chart
|1997 - 2004
|2nd Gen (C5/4B)
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single / double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.
Replacement car audio fascia to enable you to change the original radio in the vehicle to a Single/ Double DIN aftermarket version
A pocket is provided for Single DIN installation
Fits Audi A6 (C5) (2000-2004) car models
COLOUR: MATT BLACK
For double din installation the central bar of the fascia needs to be cut out.
If fitting a new double din unit you need to cut out the central bar and will require a standard 113mm high metal cage as used by most aftermarket head-unit manufacturers. This cage is normally provided with the unit. If not you will need our cage item number 51-013.
Important Fascia Notes
- China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
- We do not take any responsibility for China units not fitting as they are not industry standard size.
- If the cage supplied with the stereo does not fit the fascia then you must purchase a universal cage which is slightly smaller.
- Click here for CT23UN01 UNIVERSAL Mounting Cage
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.
Please make sure that is the correct Fascia for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.