InCarTec 39-IVE-01 Iveco Daily (2014-2019) Steering Wheel Control Interface (ISO CONNECTIONS)
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: 39-IVE-01
- EAN: 7427307009032
- Warranty: 2 Years Warranty
Description
Steering wheel control interface and adaptor cable for Iveco Daily vans with original basic radios to fit an aftermarket radio upgrade.
This interface uses ISO connections behind the original radio to allow the use of the original steering wheel audio control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, reverse, handbrake and illumination signals.
The cable adaptor from the connector in the van to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adaptor cable.
This interface is only suitable for Iveco Daily (2014-2019) vans with factory fitted basic radio systems.
Product Compatibility Chart
| Make | Model | Years | Notes |
| Iveco | Daily | 2014 - 2019 | 6th Gen |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Patch lead INCLUDED for the steering controls depending on the make of radio being fitted.
| Radio Being Fitted | Part Number | Short Description |
| Universal | 39-HU-UNI | Self-pinning Patch lead for 39-Series Steering wheel control for Alpine, kenwood, JVC, Blaupunkt (Mini ISO), Clarion, Zenec, Resistive Programming (Chinese/ Unbranded), Sony and Pioneer stereos |
What's Included
- 39-IVE-01 Steering Control Adaptor
- Stereo Patch Lead
Works with the following brands
- Alpine
- Clarion
- JVC
- Kenwood
- Pioneer
- Sony
- China Units
TECHNICAL NOTE:
- CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
- SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.
IMPORTANT NOTE
- China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
- Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.
We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.
