Steering control interface to retain the use of the audio steering control buttons in Nissan . This interface has a 20 pin connector and a 24 pin connector.

Key Features

• Retains the use of the audio steering wheel controls.
• Adapts from the Nissan connectors to standard aftermarket ISO connectors.
• Provides CAN ignition, speed pulse and handbrake outputs.
• Retains the use of the original USB and aux sockets.

This interface is only compatible with Qashqai Acenta model variants. This interface has a 20 pin connector and a 24 pin connector.

These cars have various different set-ups behind the radio, please remove the radio and check if you have a 24/32 or 40 pin connector, before purchasing a solution.. 

What's Included

• 29-CTSNS011 Steering Control Adaptor
• Stereo Patch Lead

Works with the following brands

• Alpine
• Clarion
• JVC
• Kenwood
• Pioneer
• Sony
• China Units

Patch lead INCLUDED  for the steering controls depending on the make of radio being fitted.

TECHNICAL NOTE:

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE

• China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
   
• Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.

We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.