Parking sensor buzzer retention interface. For cars that lose the parking sensor tones when the original radio is removed.

The original parking tones and warning chimes in many cars are produced by the original radio and when an aftermarket radio is fitted these tones are lost. This CANbus interface reads the data in the car and reproduces the parking tones and warning chimes through an additional speaker.

The interface has a universal adapter cable, this needs to be hardwired to the power, ground and CANbus wires in the car. Fitting instructions are included.

This interface is not plug and play. It has loose wires which will need to be spliced into the cars original wiring behind the radio. You will need to connect to CAN  Hi and Low   as well as ignition and earth.

The interface also gives an extra CANbus output, which can be set as ignition, speed pusle, handbrake or reverse gear output. This extra output  needs a set up programming while installing on the car.