Adaptor cable to connect various General Motors cars and trucks to standard ISO connectors to enable the fitting of an aftermarket head unit.

This adapter harness is designed to adapt from the original 48 Pin connector in the dashboard of various MG (2009 onwards) vehicles to standard aftermarket ISO connectors to allow the fitting of a new radio.

Only fits vehicles with an OEM radio fitted with large 48 pin connector. Does not provide CAN ignition or steering wheel controls.

This cable includes a hard wire 12v ignition lead and will need to be connected to a switched 12v ignition source. An illumination wire that needs to be hardwired is also included.

Does not retain steering wheel controls or any other original radio functions other than power and speakers.

Harness Adaptors

Connect the head unit to the original radio connector without the need to cut any of the existing wiring.

TECHNICAL NOTE

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

If in doubt please email us with your vehicle details and we will confirm what you require.

Please make sure that is the correct Wiring Harness for your car by firstly checking to see if your make, model and year of car is listed in the description. Secondly by checking to see if the Shape in the picture listed is the same as you have in your vehicle. We try to provide upto date information as possible. If you are unsure please contact our Customer Service and we will be happy to help you.