InCarTec 20-163 Vauxhall 20 Pin Radio Replacement ISO Adaptor Cable (No Steering Controls)
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 10
- Brand: InCarTec
- Model: 20-163
- EAN: 7427282744041
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
| Make | Model | Years | Notes |
| Vauxhall | Movano | 2010 - 2019 |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Chevrolet, Nissan, Renault, Vauxhall radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 20 pin Nissan connector to standard aftermarket ISO connectors.
This cable includes the power and speaker supply. If the car has steering wheel controls then use item 29-671, 29-678 or 29-683 instead.
This cable is mostly used in cars from 2005 onward. Check that the car has a single large 20 pin connector at the back of the radio that has two rows of small terminals with a large terminal at either end.
Harness Adaptors
Connect the head unit to the original radio connector without the need to cut any of the existing wiring.
TECHNICAL NOTE
- CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
- SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.
If in doubt please email us with your vehicle details and we will confirm what you require.
Please make sure that is the correct Wiring Harness for your car by firstly checking to see if your make, model and year of car is listed in the description. Secondly by checking to see if the Shape in the picture listed is the same as you have in your vehicle. We try to provide upto date information as possible. If you are unsure please contact our Customer Service and we will be happy to help you.
