InCarTec

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Citroen Nemo, Peugeot Bipper or Fiat Fiorino/ Qubo vehicles.Package IncludesDouble Din Fascia Adaptor  Double Din Metal Cage Kit (103mm high) Steering Wheel ..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes PHONE Commands for compatible head-units.This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. Fits cars with the 12 way ..

Use this cable to retain an original fitment camera when fitting a new head unit.For General Motors (GM), Chevrolet, Cadillac, and GMC cars and trucks with original equipment navigation and reverse camera which use a 20 pin plug. Check vehicle before ordering for this plug, cars within these yea..

Adapter cable to connect various General Motors cars and trucks to standard ISO connectors to enable the fitting of an aftermarket head unit.This adapter harness is designed to adapt from the original 44 Pin connector in the dashboard of various Chevrolet, Cadillac, Vauxhall, Opel, Holden vehicl..

Car radio fascia adaptor panel to allow the fitting of an aftermarket double DIN car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.This fascia kit uses side fixing brackets, the bracke..

Reverse view high level brake light camera and video monitor kit specially designed for Fiat Ducato, Citroen Relay and Peugeot Boxer (2006 Onwards) vehicle models    The camera included in this kit replaces the high level brake light at the rear of the vehicle and provides additional v..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power to connect the car to the aftermarket head-unit. The interface also provides a breakout cable to retain the original head unit to provide a video feed to t..

Cable to convert Citroen/ Fiat/ Peugeot & Toyota cars with Quadlock connector to a European car radio with ISO connectors.This cable has a loose wire for connecting to an ignition source in the car as their is no traditional + 12v key in ignition supply behind radio. The car has CAN bus data..

Complete fitting kit to install a single DIN head unit and retain the original steering wheel controlsFor Alpine head units an additional antenna adapter may be needed, part number 21-101Complete fitting kit to install a single DIN head unit and retain the original steering wheel controls ..

BMW, Land Rover, Mini Quadlock to ISO T cable for cars 2005 onwards without Ignition supply in the radio connector. This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit.This cable fits behind the car radio and is used as a break-out cable to enable the ..

Provide a sound upgrade to your Toyota, Citroen C1, Peugeot 108, Scion or Subaru front or rear doors with our 165mm (6.5 inch) speaker upgrade fitting kit.Please see our compatibility list for more cars that can benefit from this upgrade kit.This fitting kit allows the fitting of new after..

USB & AUX Retention InterfaceMaintain the cars existing AUX and USB sockets but use them with a new aftermarket head-unit. This unit uses the cars original housingKeep the original USB and AUX socket in the car. This adapter has loose orange and black wires, connect these to an..

Complete stereo upgrade kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in select Vauxhall vehicles.Package IncludesSingle Din Fascia (GLOSS BLACK/PIANO BLACK) Steering Wheel Adaptor Interface Fakra to DIN Aerial Adaptor, 12v Phantom Pow..

Complete cage kit and replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThe kit is designed to replace the metal cage which is normally supplied with the new head-unit.   COLOUR: MATT BLACKModification to the..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 145 mm Ring outside : 268.8 / 197 mm Ring heig..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.This interface will retain the use of the steering wheel audio controls such as use of the volume, track skip, source and phone buttons with an aftermarket head unitSteering wh..

Replacement car audio fascia to enable you to change the original radio in the car to a Single or Double DIN aftermarket version172mm x 98mm. This fascia has side fix brackets so no cage is needed Fits Mazda 2 (3rd Gen) DE (2007-2014) car models A pocket is included for Single DIN insta..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version.Uses metal side fixing brackets for a flush fit, professional finish and includes a location for the factory hazard switch.Fits Toyota Yaris/ Vitz car models (2020 onwards) ..

Double DIN car radio fascia for Toyota RAV4 (XA50) 2019 onwards car models.Only suitable for aftermarket radios with  "L shaped Single DIN chassis" with a chassis at the lower end (e.g. Alpine ILX702D) or for 6.8 inch modular aftermarket head units like (eg. Pioneer EVO62 or EVO64..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.{ vehicle_compatibility }Please make sure that is the correct Speaker Adaptor for your vehicles by firstly..