InCarTec 20-134-SWC Nissan 10 and 6 Pin Radio Replacement ISO Steering Wheel Control Interface
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: 20-134-SWC
- EAN: 7427282681575
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
Make | Model | Years | Notes |
Nissan | 350z | 2003 - 2010 | |
Nissan | Maxima | 2004 - 2008 | |
Nissan | Micra | 1997 - 2003 | K11c |
Nissan | Murano | 2005 - 2008 | 1st Gen (Z50) |
Nissan | Navara | 1997 - 2004 | (D22) |
Nissan | Pathfinder | 1996 - 2004 | R50 |
Nissan | Patrol | 1998 - 2009 | Y61 |
Nissan | Skyline | 1999 - 2002 | R34 |
Nissan | X-Trail | 2001 - 2007 | 1st Gen (T30) |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Nissan radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 10 and 6 pin Nissan connectors to standard aftermarket ISO connectors.
This cable includes the power and speaker supply and will return the use of the steering wheel controls when fitting an aftermarket Chinese made head-units with self learn steering controls ( KEY1, KEY2 or SWC1, SWC2)
This cable is mostly used in cars pre 2005. Check that the car has the twin 10 and 6 pin connectors at the back of the radio.
This cable is designed for Chinese made head-units with self learn steering controls ( KEY1, KEY2 or SWC1, SWC2)
What's Included
- 20-134-SWC Steering Control Adaptor
- Stereo Patch Lead
Works with the following brands
- Alpine
- Clarion
- JVC
- Kenwood
- Pioneer
- Sony
- China Units
Patch lead INCLUDED for the steering controls depending on the make of radio being fitted.
TECHNICAL NOTE:
- CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
- SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.
IMPORTANT NOTE
- China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
- Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.
We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.