i-dapter 52 Pin Steering Wheel Control Interface For Citroen, Fiat, Opel and Peugeot
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: ACV
- Model: IDFT1
- Other Part #: CTUFT01
- EAN: 7427288192617
- Warranty: 1 Year Warranty
Description
The i-dapter allows you to retain the visual display of vehicle functions, such as parking sensors, climate control, and seat heating, when replacing the original radio. Vehicle-specific settings are supported and displayed on the aftermarket unit.
The vehicle's steering wheel remote control function is also supported. Depending on the vehicle's equipment, the functionality, and the software of the aftermarket unit, some operating functions may be omitted or replaced by others.
Please ensure that the original factory radios we have listed and the adapter connectors shown match your vehicle's equipment. Before installation, check the vehicle menu for various settings. Test the functionality of the settings and the vehicle system before final installation.
Product Compatibility Chart
| Make | Model | Years | Notes |
| Citroen | E-Jumper | 2021 - 2024 | (259) |
| Citroen | Jumper | 2014 - 2024 | (250) |
| Fiat | 500 | 2015 - 2022 | (ZAF 312) |
| Fiat | 500L | 2012 - 2022 | (ZAF 199) |
| Fiat | Ducato | 2014 - 2021 | (ZAF 250) |
| Opel | Movano | 2021 - 2024 | CARGO C (Y) |
| Opel | Movano | 2021 - 2024 | ELECTRIK CARGO C (Y) |
| Peugeot | Boxer | 2014 - 2024 | (Y) |
| Peugeot | E-Boxer | 2021 - 2024 | (Y) |
Connection: OEM reversing camera > RCA (male) yellow
Connection: USB A extension > software update interface
Vehicles with Continental 250VP1 / 250VP2 OEM device
Vehicles with UConnect OEM device
Vehicles with Continental Mopar OEM device
Vehicles with Daiichi device***Please note that in some cases, not all functions are supported. For example, Trailer Assist, eCall, or other driver assistance and comfort systems.
Activate and configure the reversing camera input in the retrofit device menu
i-adapter connection:
purple/white: +12V reversing signal RCA (male) ochre: reversing camera input Retrofit device visualization i-adapter settings > Retrofit device reversing camera input Camera image or i-adapter settings and visualization not available: Connection of an additional ground contact RCA outer conductor at the camera connection and device connection i-adapter settings: Steering wheel remote control Press and hold track forward or backward Depending on the OEM vehicle equipment and software: Not all vehicle settings are supported. Not all vehicle functions are supported. Not all vehicle information is visualized. High beam assist is not supported. Driver assistance systems are not supported. Start/stop function is not adjustable.
What's Included
- IDFT1 Steering Control Adaptor
- FREE Stereo Patch Lead
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.
Please make sure that is the correct Steering Control Adaptor for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.
