Package Includes

• Double Din Fascia Adaptor (Black) - This is the Better Flush Fitting Fascia Adaptor
• Wiring Harness Adaptor
• Booster Aerial Adaptor

PICTURE ILLUSTRATES STEREO FITTED INTO THE FASCIA WHICH GIVES THE SEAMLESS FLUSH LOOK

Fascia Adaptor

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior

Wiring Harness

The wiring harness will allow to install the stereo.

Please Note: You will need to connect the red wire to the ignition supply in the fuse box.

Please Note

• Red wire has to be connected to a separate ignition feed in the vehicle to make aftermarket head unit to power up
• Orange cable requires connection to illumination wire but only if the radio requires this for dimming purposes at night.
• Blue wire needs to be connected to the Remote Antenna or ignition supply wire (if rem ant wire not available) on back of car stereo.

Please Note

• When connected your new stereo may not power up, and this is no fault of the wiring harness purchased.
• Audi / VW / Skoda / Fiat and other vehicles tend not to have an ignition switched live feed.
• In these cases it is necessary to manually connect a spurred live feed from fuse box for example to feed switched power so the new stereo turns on and off with the key.
• The wire in particular on the new wiring harness will be the red wire.

Aerial Adaptors

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. 

Note: The blue wire is connected to the back of the car stereo where there is a blue wire thats says antenna remote out or ant remote out.

Important Fascia Notes

• The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.