CT20VW08 VW Scirocco, Tiguan, Touareg, Touran, Tranporter, Vento Wiring Harness With Aerial Adaptor
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 10+ in stock
- Brand: Connects2
- Model: CT20VW08
- EAN: 7427282678742
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
Make | Model | Years | Notes |
Volkswagen | Amarok | 2009 - 2016 | |
Volkswagen | Beetle | 2011 - 2015 | |
Volkswagen | Bora | 2005 - 2011 | |
Volkswagen | Caddy | 2004 - 2015 | |
Volkswagen | Caravelle | 2009 - 2015 | |
Volkswagen | EOS | 2006 - 2016 | |
Volkswagen | Fox | 2005 - 2011 | |
Volkswagen | Golf | 2003 - 2013 | |
Volkswagen | Jetta | 2005 - 2015 | |
Volkswagen | Multivan | 2003 - 2015 | |
Volkswagen | Passat | 2005 - 2015 | |
Volkswagen | Polo | 2005 - 2014 | |
Volkswagen | Scirocco | 2008 - 2015 | |
Volkswagen | Tiguan | 2007 - 2015 | |
Volkswagen | Touareg | 2003 - 2015 | |
Volkswagen | Touran | 2003 - 2015 | |
Volkswagen | Transporter | 2003 - 2015 | |
Volkswagen | UP! | 2011 - 2016 | |
Volkswagen | Vento | 2010 - 2019 |
Connection: Quadlock (Fakra)
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector.
Features:
- Converts car specific power/speaker connector to a universal ISO connector
- Please check the connections in the vehicle match the harness you are purchasing
With Aerial Adaptor
Please Note
- Red wire has to be connected to a separate ignition feed in the vehicle to make aftermarket head unit to power up
- Orange cable requires connection to illumination wire but only if the radio requires this for dimming purposes at night.
- Blue wire needs to be connected to the Remote Antenna or ignition supply wire (if rem ant wire not available) on back of car stereo.
Please Note
- When connected your new stereo may not power up, and this is no fault of the wiring harness purchased.
- Audi / VW / Skoda / Fiat and other vehicles tend not to have an ignition switched live feed.
- In these cases it is necessary to manually connect a spurred live feed from fuse box for example to feed switched power so the new stereo turns on and off with the key.
- The wire in particular on the new wiring harness will be the red wire.
TECHNICAL NOTE
- CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
- SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.
If in doubt please email us with your vehicle details and we will confirm what you require.
Please make sure that is the correct Wiring Harness for your car by firstly checking to see if your make, model and year of car is listed in the description. Secondly by checking to see if the Shape in the picture listed is the same as you have in your vehicle. We try to provide upto date information as possible. If you are unsure please contact our Customer Service and we will be happy to help you.