This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and the other end into your new radio, without the need of tools or cutting of wires.

Features:

• Converts car specific power/speaker connector to a universal ISO connector
• Please check the connections in the vehicle match the harness you are purchasing

This vehicle can accept single din stereo replacement or double din stereo replacement. For single din you will continue to use the pocket under the original radio  and new radio will bolt onto original side brackets without needing to use the cage or trim supplied with the stereo.
Double din stereo will mount the same way with no cage or trim required but removal of the original pocket to make space.

Suitable for Vehicle in Photo:

Harness Adaptors

Connect the head unit to the original radio connector without the need to cut any of the existing wiring.

TECHNICAL NOTE

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

If in doubt please email us with your vehicle details and we will confirm what you require.

Please make sure that is the correct Wiring Harness for your car by firstly checking to see if your make, model and year of car is listed in the description. Secondly by checking to see if the Shape in the picture listed is the same as you have in your vehicle. We try to provide upto date information as possible. If you are unsure please contact our Customer Service and we will be happy to help you.