This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.

The CT51-VW01 is a CAN Bus interface specifically designed to help retain the E-Call functions of the 'emergency call system' in select Seat, Skoda & Volkswagen vehicles 2015-Up.

The CT51-VW01 is an ideal accessory to include between the wiring setup of any installation when upgrading to an aftermarket head unit. Designed to work with a range of Connects2 installation kits the CT51-VW01 is the perfect solution for retaining the vehicle's E-Call function. 

this product is for vehicles with MIB PQ systems only.

When connected your new stereo may not power up, and this is no fault of the wiring harness purchased.
Audi / VW / Skoda / Fiat and other vehicles tend not to have an ignition switched live feed.
In these cases it is necessary to manually connect a spurred live feed from fuse box for example to feed switched power so the new stereo turns on and off with the key.
The wire in particular on the new wiring harness will be the red wire.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Adaptor for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.