The CT51-VL03 is an amplifier bypass wiring harness for use with the 2002 to 2014 Volvo XC90. This harness allows you to connect an aftermarket radio directly to the car's speakers after bypassing the original amplifier. This harness also allows for the retention of the original subwoofer.

a new extra amplifier will be needed to keep the original sub-woofer. The harness features additional wiring for the use of additional steering wheel and/or parking sensor retention interfaces (sold separately).

When connected your new stereo may not power up, and this is no fault of the wiring harness purchased.
Audi / VW / Skoda / Fiat and other vehicles tend not to have an ignition switched live feed.
In these cases it is necessary to manually connect a spurred live feed from fuse box for example to feed switched power so the new stereo turns on and off with the key.
The wire in particular on the new wiring harness will be the red wire.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Active System Adaptor for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.