DAB Splitter - DIN Female to DIN Male. With SMA Connector. Allows DAB installation while using the existing vehicle antenna. For non amplified antenna only.

This antenna is compatible with all non-amplified FM aerials only and will NOT work with amplified booster aerial systems. Simply plug in line with your head unit aerial connection and then plug the DAB plug into the DAB socket on the back of the head unit.

• Compatible with a wide range of vehicles
• Connect the blue wire to the aerial power lead that is 12 volts with the radio switched on.
• No need to install an additional DAB Antenna when installing an aftermarket DAB Tuner.

Compatible with the following make of DAB Car Stereos:

• Pioneer
• Sony
• JVC
• Blaupunkt
• Alpine
• Beat
• Kenwood
• LG

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Antenna Adaptor for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.