Package Included

• Focal ISBMW100L 5" 2 Way Component Car Speakers
• Focal ICBMW100 Custom Fit 4" 2-Way Coaxial Speaker
• Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit

The system is composed of a two-way component kit ISBMW100L, a two-way coaxial kit ICBMW100

2-WAY COMPONENT KIT

ISBMW100L is designed for drivers who want to replace their original audio system with a quality sound solution adapted to their vehicle. This kit is equipped with the neodymium engine and the Aluminium/Magnesium inverted dome tweeter, exclusive Focal technologies for high power handling and perfectly rendered trebles.

Features

• Type 2-way component kit
• Woofer 5" (100mm)
• Tweeter Inverted dome
• Magnet Neodymium
• Cone Black Polyglass
• Surround Butyl
• Impedance 4Ω
• Max. power 80W
• Nom. power 40W RMS
• Sensitivity (2.83V/1m) 89.5dB
• Frequency response 80Hz-23kHz
• Crossover Separated

Specifications

• Nominal power 40 W
• Maximum power 80 W
• Sensitivity 89.5 dB
• Nom. impedance 4 Ω
• Cone Polyglass
• Surround Butyl
• DC resistance 3.5 Ω
• VC diameter 25 mm 1"
• Former Kapton
• Layers 2
• Wire Copper
• Net weight 400g 0.88lb
• Frequency response 80-23000 Hz
• Crossover 6 dB/Oct @4 kHz

Parameters

• Rdc 3.5 Ω
• Fs 110 Hz
• Mms 4.5 g
• Cms 0.4 mm/N
• Vas 1.3 l
• Qts 1.1
• Qes 1.2
• Qms 8
• Bxl 4 N/A
• Sd 50.7 cm^
• SPL 89.5 dB
• Xmax 2 mm

2-Way Coaxial Kit

ICBMW100 is designed for drivers who want to replace their original audio system with a quality sound solution adapted to their vehicle. This kit is equipped with the neodymium engine and the Aluminium/Magnesium inverted dome tweeter, exclusive Focal technologies for high power handling and perfectly rendered trebles.

Key Points

• Quick installation
• No wire to cut, no modification
• 100% compatible with your vehicle
• Sound quality superior compared to the original one
• Mounting accessories included

Features

• Type 2-way coaxial kit
• Woofer 5" (100mm)
• Tweeter Inverted dome
• Magnet Neodymium
• Cone Black Polyglass
• Surround Butyl
• Impedance 4Ω
• Max. power 80W
• Nom. power 40W RMS
• Sensitivity (2.83V/1m) 89.5dB
• Frequency response 80Hz-23kHz
• Crossover Separated

Specifications

• Nominal power 40 W
• Maximum power 80 W
• Sensitivity 89.5 dB
• Nom. impedance 4 Ω
• Cone Polyglass
• Surround Butyl
• DC resistance 3.5 Ω
• VC diameter 25mm 1"
• Former Kapton
• Layers 2
• Wire Copper
• Net weight 400g 0.88lb
• Frequency response 80-23000 Hz
• Crossover 6 dB/Oct @4 kHz

PLEASE NOTE FOR FRONT SPEAKERS TO FIT

• The ISBMW100L component kit can only be installed at the front of the vehicle if there are tweeter locations ("A" pillar, dash or doors).
• In case there is no tweeter location in your car, please contact the BMW spare parts department to get specific tweeter location mounts.
• The mounts can also be found on ebay and Amazon from third party retailers.

Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit

• Expert level sound dampening
• Aluminum outer layer
• Self adhesive
• Easy installation
• Use on all metal panels, doors, roof, floor, firewall & trunk
• Kills panel resonance, squeaks and rattles
• Highest damping vs. weight ratio of any material available
• Improves overall audio frequency response and bass output
• Speaker kit

Expert RoadKill Published Specifications

• Minimum Thickness 0.080in
• Minimum Weight 0.65bs/ft2
• Aluminum Layer- 6 mils