BMW 1 Series E87 2004 - 2011 5 Door Focal INSIDE Speaker Upgrade Kit
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 4
- Brand: Focal
- Model: ISBMW100L + ICBMW100 + RKXSK
- EAN: 7427282677660
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
Make | Model | Years | Notes |
BMW | 1 Series | 2004 - 2011 | E87 |
PLEASE NOTE FOR FRONT SPEAKERS TO FIT
- The IS BMW 100L component kit can only be installed at the front of the vehicle if there are tweeter locations ("A" pillar, dash or doors).
- In case there is no tweeter location in your car, please contact the BMW spare parts department to get specific tweeter location mounts.
- The mounts can also be found on ebay and Amazon from third party retailers.
PICTURE ILLUSTRATES VEHICLE AND TYPES OF SYSTEMS AVAILABLE
Package Included
- Focal ISBMW100L 5" 2 Way Component Car Speakers
- Focal ICBMW100 Custom Fit 4" 2-Way Coaxial Speaker
- Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit
The system is composed of a two-way component kit ISBMW100L, a two-way coaxial kit ICBMW100
2-WAY COMPONENT KIT
ISBMW100L is designed for drivers who want to replace their original audio system with a quality sound solution adapted to their vehicle. This kit is equipped with the neodymium engine and the Aluminium/Magnesium inverted dome tweeter, exclusive Focal technologies for high power handling and perfectly rendered trebles.
Features
- Type 2-way component kit
- Woofer 5" (100mm)
- Tweeter Inverted dome
- Magnet Neodymium
- Cone Black Polyglass
- Surround Butyl
- Impedance 4Ω
- Max. power 80W
- Nom. power 40W RMS
- Sensitivity (2.83V/1m) 89.5dB
- Frequency response 80Hz-23kHz
- Crossover Separated
Specifications
- Nominal power 40 W
- Maximum power 80 W
- Sensitivity 89.5 dB
- Nom. impedance 4 Ω
- Cone Polyglass
- Surround Butyl
- DC resistance 3.5 Ω
- VC diameter 25 mm 1"
- Former Kapton
- Layers 2
- Wire Copper
- Net weight 400g 0.88lb
- Frequency response 80-23000 Hz
- Crossover 6 dB/Oct @4 kHz
Parameters
- Rdc 3.5 Ω
- Fs 110 Hz
- Mms 4.5 g
- Cms 0.4 mm/N
- Vas 1.3 l
- Qts 1.1
- Qes 1.2
- Qms 8
- Bxl 4 N/A
- Sd 50.7 cm^
- SPL 89.5 dB
- Xmax 2 mm
2-Way Coaxial Kit
ICBMW100 is designed for drivers who want to replace their original audio system with a quality sound solution adapted to their vehicle. This kit is equipped with the neodymium engine and the Aluminium/Magnesium inverted dome tweeter, exclusive Focal technologies for high power handling and perfectly rendered trebles.
Key Points
- Quick installation
- No wire to cut, no modification
- 100% compatible with your vehicle
- Sound quality superior compared to the original one
- Mounting accessories included
Features
- Type 2-way coaxial kit
- Woofer 5" (100mm)
- Tweeter Inverted dome
- Magnet Neodymium
- Cone Black Polyglass
- Surround Butyl
- Impedance 4Ω
- Max. power 80W
- Nom. power 40W RMS
- Sensitivity (2.83V/1m) 89.5dB
- Frequency response 80Hz-23kHz
- Crossover Separated
Specifications
- Nominal power 40 W
- Maximum power 80 W
- Sensitivity 89.5 dB
- Nom. impedance 4 Ω
- Cone Polyglass
- Surround Butyl
- DC resistance 3.5 Ω
- VC diameter 25mm 1"
- Former Kapton
- Layers 2
- Wire Copper
- Net weight 400g 0.88lb
- Frequency response 80-23000 Hz
- Crossover 6 dB/Oct @4 kHz
PLEASE NOTE FOR FRONT SPEAKERS TO FIT
- The ISBMW100L component kit can only be installed at the front of the vehicle if there are tweeter locations ("A" pillar, dash or doors).
- In case there is no tweeter location in your car, please contact the BMW spare parts department to get specific tweeter location mounts.
- The mounts can also be found on ebay and Amazon from third party retailers.
Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit
- Expert level sound dampening
- Aluminum outer layer
- Self adhesive
- Easy installation
- Use on all metal panels, doors, roof, floor, firewall & trunk
- Kills panel resonance, squeaks and rattles
- Highest damping vs. weight ratio of any material available
- Improves overall audio frequency response and bass output
- Speaker kit
Expert RoadKill Published Specifications
- Minimum Thickness 0.080in
- Minimum Weight 0.65bs/ft2
- Aluminum Layer- 6 mils