BMW i3 2013 - 2017 Front and Rear Focal INSIDE Speaker Upgrade Kit
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 4
- Brand: Focal
- Model: ISBMW100L + ICBMW100L + RKXSK
- EAN: 7427282681759
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
Make | Model | Years | Notes |
BMW | i3 | 2013 - 2017 |
The system is composed of a two-way component kit ISBMW100L and of a two-way coaxial kit ICBMW100L.
The IS BMW 100L component kit can only be installed at the front of the vehicle if there are tweeter locations ("A" pillar, dash or doors).
In case there is no tweeter location in your car, please contact the BMW spare parts department to get specific adapters.
Package Includes
- Focal ISBMW100L 5" 2 Way Component Car Speakers
- Focal ICBMW100L 4" 2 Way Coaxial Car Speakers
- Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit
The system is composed of a two-way component kit ISBMW100L and of a two-way coaxial kit ICBMW100L.
The ISBMW100L component kit can only be installed at the front of the vehicle if there are tweeter locations ("A" pillar, dash or doors).
In case there is no tweeter location in your car, please contact the BMW spare parts department to get specific adapters.
2-WAY COMPONENT KIT
ISBMW100L is designed for drivers who want to replace their original audio system with a quality sound solution adapted to their vehicle. This kit is equipped with the neodymium engine and the Aluminium/Magnesium inverted dome tweeter, exclusive Focal technologies for high power handling and perfectly rendered trebles.
Features
- Type 2-way component kit
- Woofer 5" (100mm)
- Tweeter Inverted dome
- Magnet Neodymium
- Cone Black Polyglass
- Surround Butyl
- Impedance 4Ω
- Max. power 80W
- Nom. power 40W RMS
- Sensitivity (2.83V/1m) 89.5dB
- Frequency response 80Hz-23kHz
- Crossover Separated
Specifications
- Nominal power 40 W
- Maximum power 80 W
- Sensitivity 89.5 dB
- Nom. impedance 4 Ω
- Cone Polyglass
- Surround Butyl
- DC resistance 3.5 Ω
- VC diameter 25 mm 1"
- Former Kapton
- Layers 2
- Wire Copper
- Net weight 400g 0.88lb
- Frequency response 80-23000 Hz
- Crossover 6 dB/Oct @4 kHz
Parameters
- Rdc 3.5 Ω
- Fs 110 Hz
- Mms 4.5 g
- Cms 0.4 mm/N
- Vas 1.3 l
- Qts 1.1
- Qes 1.2
- Qms 8
- Bxl 4 N/A
- Sd 50.7 cm^
- SPL 89.5 dB
- Xmax 2 mm
2-Way Coaxial Kit
ICBMW100L is designed for drivers who want to replace their original audio system with a quality sound solution adapted to their vehicle. This kit is equipped with the neodymium engine and the Aluminium/Magnesium inverted dome tweeter, exclusive Focal technologies for high power handling and perfectly rendered trebles.
Key Points
- Quick installation
- No wire to cut, no modification
- 100% compatible with your vehicle
- Sound quality superior compared to the original one
- Mounting accessories included
Features
- Type 2-way coaxial kit
- Woofer 5" (100mm)
- Tweeter Inverted dome
- Magnet Neodymium
- Cone Black Polyglass
- Surround Butyl
- Impedance 4Ω
- Max. power 80W
- Nom. power 40W RMS
- Sensitivity (2.83V/1m) 89.5dB
- Frequency response 80Hz-23kHz
- Crossover Separated
Specifications
- Nominal power 40 W
- Maximum power 80 W
- Sensitivity 89.5 dB
- Nom. impedance 4 Ω
- Cone Polyglass
- Surround Butyl
- DC resistance 3.5 Ω
- VC diameter 25mm 1"
- Former Kapton
- Layers 2
- Wire Copper
- Net weight 400g 0.88lb
- Frequency response 80-23000 Hz
- Crossover 6 dB/Oct @4 kHz
Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit
- Expert level sound dampening
- Aluminum outer layer
- Self adhesive
- Easy installation
- Use on all metal panels, doors, roof, floor, firewall & trunk
- Kills panel resonance, squeaks and rattles
- Highest damping vs. weight ratio of any material available
- Improves overall audio frequency response and bass output
- Speaker kit
Expert RoadKill Published Specifications
- Minimum Thickness 0.080in
- Minimum Weight 0.65bs/ft2
- Aluminum Layer- 6 mils