Bluetti Anderson Connector

The BLUETTI Anderson Connector Cable for Charger 2 is a dedicated bidirectional power and communication cable. It bridges the BAT Port on the BLUETTI Charger 2 (1,200W DC-to-DC Dual Alternator/Solar Charger) directly to the Anderson Expansion + Data Port on the BLUETTI FridgePower unit or BlueCell 200 (BC200) expansion battery modules.  

This cable allows high-current DC charging/discharging while transmitting real-time communication data between the Charger 2 controller and the ultra-slim battery systems.  

Key Features & Specifications

• Combined Power & Data Connection: Features a dual-purpose layout integrating high-amperage Anderson power contacts alongside signal/data pins to ensure proper battery detection, telemetry reporting, and firmware management via the BLUETTI app.  
• Bidirectional Energy Flow: Enables 2-way DC power transmission—allowing Charger 2 to charge the FridgePower / BlueCell 200 from vehicle alternators or solar arrays, or allowing the battery to output back into the system. 
• Specific Port Mapping
  • Charger 2 Side: Connects to the BAT Port (Auxiliary Battery Port).  
  • Battery Side: Connects to the combined Anderson Expansion Port + Communication Data Interface on the FridgePower or BlueCell 200 module.  
• Heavy-Duty Construction: Rated for high DC currents (up to 75A / 1,000W+ transfer rates) with thick gauge conductors and heat-resistant insulation designed for vehicle, RV, and off-grid installations.  
• Keyed Terminals: Polarized Anderson connectors prevent accidental reverse-polarity damage during setup.